Advertisement
CONTROLS
MIX (DRY/TAPE) The MIX (DRY/TAPE) knob controls the
mix level between the Dry and Effect level of the FX 96
Echo Fx. Turning the knob all of the way down, produces
all dry signal. Turning it all of the way up, produces a
100% wet effect.
DELAY TIME: The DELAY TIME knob controls the delay
time of the FX 96 Echo Fx. Turning the knob all of the way
up produces up to approximatley 800 milliseconds of delay
time.
REGEN/REPEAT: The REGEN/REPEAT knob controls
the amount of delay regeneration that is fed into the signal
of the FX 96. By turning the knob all of the way up, this will
produce more delay repeats. By turning down the
REGEN/REPEAT control down, this will produce less
repeats,
TAPE QUALITY: The TAPE QUALITY knob controls the
Low Pass Filter which is use to re-create analog tape
quality variances of the past. The higher the TAPE
QUALITY knob is turned up, the more "grainy" and Muddy
the tape quality becomes.
FOOTSWITCH: Switches the Echo effect in or out of the
signal path.
LED INDICATOR: Lights when the Echo is enabled, and
is not lit when the Echo is bypassed.
JACKS: Input, Output, AC Adapter (use the DOD PS200R
power supply only to eliminate the need for a 9 volt
battery).
Advertisement
