Zap; Basic Operation - Bounty Hunter DISCOVERY 2200 Owner's Manual

BASIC OPERATION

ZAP

The ZAP control is a convenient way to eliminate a known undesirable
metal object from detection.
To demonstrate the ZAP control:
1) Set the detector in All-Metal Mode
Note: ZAP functions in all modes, but is best demonstrated
2) Pass the search coil over an undesirable object.
3) Notice the Target Indication
Note: You can only ZAP objects that register under the
4) Press ZAP. An "R" appears under the segment to be eliminated.
5) Pass the search coil over the same object again.
The undesirable object is eliminated from detection
The ZAP control is easy to use in the field. As you are detecting, and
encounter an object which you wish to eliminate from detection,
simply press the ZAP touch pad after detecting the object.
The ZAP control eliminates the most-recently detected object category
from detection. The category eliminated is indicated with an "R".
HEADPHONE JACK
Using headphones
(not supplied)
with your metal
detector makes it
easier to identify
subtle changes in
the threshold
levels for better
detection results,
and also reduces
drain on the
batteries. The
Discovery 2200
Metal Detector
has a stereo
headphone jack
located at the rear
of the case.
12
continued
first from the All-Metal Mode.
five left-most segments (from Iron to Zinc).