Table of Contents
Advertisement
BATTERIES
Use ALKALINE
batteries only.
To install the
batteries:
G
1
Remove
battery cover by
disengaging the
clip at the back.
G
2
Align the polarity
of the batteries
correctly,
the positive "+"
toward the coil
plug connection,
as indicated by
the
+
indicators
housing.
G
3
Insert (2) 9-Volt ALKALINE batteries, with the contacts pointed inward,
and press down on the back of the batteries to snap them into place.
Some brands of batteries will require moderate force to clear the
retaining tabs.
G
4
Replace the battery door.
Most metal detector problems are due to improperly installed
batteries, or the use of non-alkaline or discharged batteries. If the
detector does not turn on, please check the batteries.
6
the
with
and
–
on
the
Hide quick links:
Advertisement
Table of Contents
