19
2.4 Acer eColor management:
a. Display Acer eColor Management OSD when user press "e" button at Function menu or trigger this
function in OSD menu/picture page.
b. Layout as following figure:
2.5 OSD Message:
Item
Auto Config
Please Wait
Input Not Supported
Cable Not Connected When the video cable is not connected, will show this message. This message will be flying
No Signal
Please Wait
Description
When User Press Hot‐Key "Auto", will show this message, and the monitor do the auto config
function.
When the Hsync Frequency, Vsync Frequency or Resolution is out of the monitor support
range, will show this message. This message will be flying.
with orange LED, and mute after about 60Secs.
When the video cable is connected, but the is no active signal input, will show this message,
then enter power saving.
After user trigger the reset function, system will show this message to notice user the reset is
in proceeding