Parking Distance Control; Special Features - Renault Espace Driver's Handbook Manual

PARKING DISTANcE cONTROL

Operating principle
Ultrasonic detectors, installed in the
front or rear bumper depending on the
vehicle, measure the distance between
the vehicle and an obstacle whilst re-
versing.
This measurement is indicated by
beeps which become more frequent the
closer you come to the obstacle, until
they become a continuous beep when
the vehicle is approximately 32 centi-
metres from the obstacle.

Special features

Ensure that the ultrasonic sensors are
not obscured (by dirt, mud, snow, etc.).
When the vehicle is being driven
at a speed below 7 mph (12 km/h),
certain noises (motorcycle, lorry,
pneumatic drill, etc.) may trigger the
beeping sound.
Operating faults
When the system detects an operating
fault there will be a 5-second, continu-
ous warning beep when reverse gear is
selected. Consult an approved dealer.
This function is an addi-
tional aid that indicates the
distance between the vehi-
cle and an obstacle whilst
reversing, using sound signals.
Under no circumstances should it
replace the driver's care or respon-
sibility whilst reversing.
The driver should always pay atten-
tion to sudden incidents during driv-
ing: always ensure that there are no
moving obstacles (such as a child,
animal, pram, bicycle, etc.) or small,
narrow objects such as stones or
posts in your path when manoeu-
vring.
2.33