Adjusting The Display Brightness; Setting The Room Code - Bose Wave Radio II Owner's Manual

Adjusting the display brightness

Alarm
Time
Menu
Tune
Tune
Alarm
Time
Menu

Setting the room code

Alarm
Time
Menu
Tune
Alarm
Time
Menu
The brightness level of the display automatically adjusts itself for low and high ambient light
conditions. This feature brightens the display for better visibility in high ambient light condi-
tions and dims the display making it less intrusive in low ambient light conditions. High and
low brightness settings can be set independently.
1. Press and hold Alarm Time (Menu) until -SETUP MENU- is displayed.
>
2. Press Tune four times until BRIGHT HI- is displayed.
3. Press Time – or Time + to set the high display brightness level to a value from 8-15.
>
4. Press Tune once until BRIGHT LO- is displayed.
5. Press Time – or Time + to set the low display brightness level from 1-8.
6. Press Alarm Time (Menu) to exit the setup menu or wait 10 seconds for the
setup menu to end automatically.
®
Your Wave radio comes from the factory ready to operate as a second room (room code B)
when connected to a Bose
radio with your Lifestyle ®
code to match that of the remote control you are using for that room.
®
Refer to your Lifestyle system owner's guide for more information on room codes.
1. Press and hold Alarm Time (Menu) until -SETUP MENU- is displayed.
>
2. Press Tune six times until ROOM- B
room letter indicate how the microswitches should be set on the Lifestyle
control.
3. Press Time – or Time + to select a room code other than room B.
4. Press Alarm Time (Menu) to exit the setup menu or wait 10 seconds for the setup menu
to end automatically.
Personalizing Your Wave
® ®
link enabled Lifestyle system. If you want to use your Wave
system beyond a second room you will need to change the room
is displayed. The dashes following the
®
Radio
®
® remote
19