Bose Acoustic Wave II Owner's Manual page 7

Using the power pack in the power case
Figure 4
Power pack in the
power case
When using the Acoustic Wave
®
Wave II power case, you can put the power pack into the rear
pocket of the case for a portable DC power source.
Before connecting the power pack, be sure to remove the AC
power cord from the Acoustic Wave
1. Plug the DC power cord into the power pack connector.
2. Feed the DC output cord through the opening in the rear
pocket of the case and slide the power pack (with indicators
facing up) into the pocket.
3. Plug the DC output cord into the DC input connector on the
rear of the Acoustic Wave
When the Acoustic Wave
draws energy from the power pack. To save battery
power, please disconnect the power pack when not using
the system.
Refer to your Acoustic Wave
guide for instructions on operating on DC power.
Using The Power Pack
®
music system in the Acoustic
® music system.
® music system.
® music system is off, it still
Power pack indicators
1
2
3
DC power cord
®
music system owner's
7