Vibrate Settings - Motorola Stature i9 User Manual

In most cases, when you delete a ring tone that you
purchased from your phone, you will have to purchase
it again.
To delete a custom ring tone:
Press /
1.
> Multimedia > Ring Tones
2.
Make sure Vibrate All
Highlight a ringtone and press /
3.
4.
Press (left softkey) to confirm.
Yes

Vibrate Settings

Vibrate All
The Vibrate All option allows you to be notified of calls
and messages with a vibration instead of an audible
alert.
To activate Vibrate All:
With the phone open, press and hold the volume
button down in standby mode. (Pressing and
holding displays "VibeAll: On." Continuing to hold
the button down displays "VibeAll: Locked."
– or –
.
is set to Off .
.
> Delete
Press /
> Multimedia > Ring Tones > Vibrate All
this option to or
On Locked
Tip Setting this option to Locked requires you to press
and hold the volume control up to turn Vibrate All off.
The Locked option helps prevent you from
accidentally turning Vibrate All off.
To deactivate Vibrate All:
1.
Press and hold the volume key up to unlock
vibrate all.
2.
Press the volume key up repeatedly to select a
volume level or press /
.
Vibrate All > Off
These icons indicate how the ringer is set:
The phone always vibrates instead of
/
making a sound.
The phone vibrates instead of making a
.
sound for phone calls.
Direct Connect calls, Group Connect
"
calls, and Talkgroup calls are heard
through the earpiece, not the speaker.
. Set
.
> Multimedia > Ring Tones >
6. Settings 73