Log; Recent Calls; Call Timers; Packet Data - Nokia N91 User Manual

Log

Recent calls

To monitor the phone numbers of missed, received,
and dialed calls, press , and select
Recent calls. The device logs missed and received calls
only if the network supports these functions, the device
is switched on, and within the network service area.
Tip! When you see a note in the standby mode about
missed calls, select Show
calls. To call back, scroll to a name or number, and
press .
To clear all recent call lists, select
calls in the recent calls main view. To clear one of the call
logs, open the log you want to erase, and select
Clear list. To clear an individual event, open a log, scroll
to the event, and press .

Call timers

To monitor the approximate duration of your incoming and
outgoing calls, press , and select
Call timers.
To set the display of the call duration while a call is active,
select My Own > Log > Options
duration. Select Yes or No.
My Own > Log >
to access the list of missed
Options > Clear recent
Options >
My Own > Log >
> Settings > Show call
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select
timers. For this you need the lock code, see "Security",
"Phone and SIM", p. 96.

Packet data

To check the amount of data sent and received during
packet data connections, press
Log > Packet data. For example, you may be charged
for your packet data connections by the amount of data
sent and received.

Monitor all communication events

Icons in Log:
Incoming
Outgoing
Missed communication events
To monitor all voice calls, text messages, or data connections
logged by the device, press
scroll right to open the general log. For each communication
event, you can see the sender or recipient name, phone
number, name of the service provider, or access point. You
can filter the general log to view just one type of event and
create new contact cards based on the log information.
Options > Clear
, and select My Own >
, select My own > Log, and
71