Register Ptt Channels; Join A Channel; Push To Talk Log; Exit Push To Talk - Nokia E70 User Manual

Hide thumbs Also See for E70:
Table of Contents

Advertisement

Available languages

Available languages

M a k e c a l l s
Channel name
— Write the channel name.
Channel privacy
— Select
Nickname in channel
Channel thumbnail
— Insert a picture that describes the channel.
To delete a channel, press the clear key.
When you log in to push to talk, push to talk automatically connects to the channels that were active when the application was
last closed.

Register PTT channels

To register a channel to the push to talk service, select
To edit the channel details, select

Join a channel

To join a channel, select
Options
hold the device in front of you during a push to talk call so you can see the display. The display informs you when it is your turn
to speak. Speak towards the microphone, and do not cover the loudspeaker with your hands. Press and hold the voice key the
entire time you are talking. When you have finished talking, release the key.
To switch between channels during multiple calls, select Swap. The active channel is highlighted.
To view the currently active participants in the channel, select
To invite a participant to a channel, select

Push to talk log

To open the push to talk log, select
talk calls.
Tip: To initiate a one-to-one call from

Exit push to talk

Select
Options
> Exit. Select
background.

Net calls

Your device supports voice calls over the Internet (Internet calls). Your device attempts emergency calls primarily over cellular
networks. If an emergency call using cellular networks is not successful, then your device attempts an emergency call through
your Internet call provider. Due to the established nature of cellular telephony, you should use cellular networks for emergency
calls, if possible. If you have cellular network coverage available, please make sure that your cellular phone is switched on and
ready to make calls before you attempt an emergency call. The capability for an emergency call using Internet telephony depends
on the availability of a WLAN network and your Internet call provider's implementation of emergency call capabilities. Contact
your Internet call provider to check the Internet telephony emergency call capability.
VoIP (voice over Internet protocol) technology is a set of protocols that facilitate phone calls over an IP network, such as the
Internet. VoIP phone calls can be established between computers, between mobile phones, and between a VoIP device and a
traditional telephone. To make or receive a VoIP call, your device must be within WLAN coverage, for example.
Before you can make net calls, you need to create a net telephone profile. When the profile is ready, you can make a net call
from all applications where you can create a regular voice call. To make a net call in standby mode to an address that does not
start with a digit, press any number key, then press # for a few seconds to clear the display and to switch the device from number
mode to letter mode. Write the address and press the call key. If you have the fold open, and you have created a net telephone
profile, write the address and press the call key.
You must define session initiation protocols (SIP) settings in
settings in
Menu
Tools
>
more information and correct settings.

Preferred profile

Select
Menu
Connect.
>
>
Before you can select the default profile, you must create profiles in
settings.
To select the profile that is used by default when you make net calls, select
desired profile, and press the joystick.
Copyright © 2006 Nokia. All Rights Reserved.
Private
or Public.
— Enter your nickname (20 characters maximum) that is displayed to other users.
Options
> Edit.
PTT
channels. Select the channel you want to talk to, and press the voice key. Remember to
>
Options
Options
PTT
>
PTT
Yes
to log out and close the service. Press
Settings
Call
and
Menu
>
>
Internet tel.
to change settings.
Options
> Register.
Options
Active
>
Send
invitation.
>
log. The log shows the date, time, duration, and other details of your push to
log, select the desired log event and press the voice key.
No
if you want to keep the application active on the
Menu
Tools
>
Tools
Settings
Call
>
>
>
Menu
23
members.
Settings
Connection
>
>
> Connection. Contact your service provider for
Tools
Settings
Connection
>
>
>
Preferred
profile, and press the joystick. Scroll to the
SIP settings
and VoIP
>
Internet tel.
>

Advertisement

Chapters

Table of Contents
loading

Table of Contents