Find A Place; Plan A Route - Nokia N78 User Manual

To use Nokia Map Loader, you must first install it to a
compatible PC. You can download the PC software from
the internet at www.nokia.com/maps. Follow the
instructions on the screen.
You must use the Maps application and browse maps
at least once before using Nokia Map Loader. Nokia Map
Loader uses the Maps history information to check the
version of map data to be downloaded.
After you have installed the PC software to your PC, to
download maps, do the following:
1. Connect your device to the PC by using a compatible
USB data cable. Select
connection mode.
2. Open Nokia Map Loader in your PC. Nokia Map
Loader checks the version of map data to be
downloaded.
3. Select the maps or voice guidance files you want,
and download and install them to your device.

Find a place

To view points of interest near your current location or
other locations on the map, select
place 0 Nearby and a category.
>
To search for a point of interest by name, select
Options Find place
>
entering the first letters of the name, and select Find.
Mass storage as the USB
Options Find
>
1 Keyword search or start
>
To search for a location by address, select
Find place By address. You must enter the city and
>
country. To use an address you have saved to a contact
card in Contacts, select Options
address Options
> >
To view a search result on the map, press the scroll key,
and select Show on map. To return to the results list,
select Back.
To view a list of your previous locations, select
Options Find place
>

Plan a route

To plan a route from one location to another (for
example, from your home to your office), do the
following:
1. Scroll to a point on the map, press the scroll key,
and select Route from.
2. Scroll to From, and select
the desired option.
To adjust the routing settings, such as the mode of
transportation, select
Routing.
3. To select the destination, scroll to To, and select
Options Select and the desired option.
>
Options
Find place
> >
Select from contacts.
4 Recent.
>
Options Select
>
Options Settings
> >
>
By
and
43