Ending Phone Calls - Blackberry Wireless Handheld User Manual

Phone
2. While you are connected to a phone call, and receive an incoming call, click
Answer - Hold Current. The current call is put on hold and you are connected
to the incoming call.
3. To alternate between the callers, click the trackwheel to view the menu, and
then click Flash.
Each call remains separate but you can alternate between them.
Tip: To alternate between the callers, you can also press the Enter key. Pressing the Enter
key is equivalent to using the Flash menu item.

Ending phone calls

1. When you finish with your call, click the trackwheel to view the menu, and
click End Call.
Tip: On the Active Call screen, press the Escape button to end the phone call.
You can also hold the button on the headset to end the call.
After the phone call ends, the Phone screen appears, displaying your list of
contacts.
Note: If your handheld battery becomes too low, a Low Battery message appears to
the left of the wireless coverage indicator and the handheld beeps. You are not
disconnected from your phone call at this point, but you should end your phone call
and recharge your handheld battery as soon as possible.
136
Phone screen menu - End Call item
BlackBerry Wireless Handheld