Mazda 5 Owner's Manual page 157

Mazda5_8V88-EA-06G_Edition1 Page156
Monday, May 15 2006 9:27 AM
Driving Your Mazda
Switches and Controls
qLights-On Reminder
If lights are on and the key is removed
from the ignition switch, a continuous
beep sound will be heard when the
driver's door is opened.
qHeadlight High-Low Beam
Push the lever forward for high beam.
Pull back to original position for low
beam.
High beam
Low beam
qFlashing the Headlights
To flash the headlights, pull the lever fully
toward you. The headlight switch does
not need to be on, and the lever will return
to the normal position when released.
í
5-48
Some models.
Form No.8V88-EA-06G
Black plate (156,1)
qHeadlight Leveling
The number of passengers and weight of
cargo in the luggage compartment change
the angle of the headlights.
The headlight leveling switch adjusts this
angle.
Select the proper setting from the following chart.
Front seat
Rear
seat
Driver Passenger
×
× ×
× × ×
× × ×
×
×: Yes
: No
qDaytime Running Lights (Canada)
In Canada, vehicles must be driven with
the headlights on during daytime
operation.
For that reason, the daytime running lights
automatically turn on when the ignition
switch is turned to the ON position.
NOTE
The Daytime Running Lights turn off
when the parking brake is applied.
í
Switch
Load
Position
0
0
1
× 2
× 3