Mackie HDA Owner's Manual page 26

HDA Specifi cations Continued...
Safety Features
Input Protection:
Display LEDs:
Construction Features
Basic Design
Cabinet
Finish
Handles
Grille
Fly Points
Pole Mount Diameter
Pole Mount Angle
FB121 Hole Diameter
Physical Properties
Height
Width
Depth
Weight
HDA Dimensions
24.7 in /
628 mm
26
HDA
RMS limiting, power supply and
amplifi er thermal protection
Power ON, Voicing Mode selection,
Sig/Limit, Thermal protection,
Front Power ON
Trapezoidal, 20˚ included angle
15 mm exterior grade premium
birch plywood
High durability black paint
One on each side
Powder-coated galvanized steel
Four M10 x 1.5 mm
1.42 in / 36 mm
10˚ and 30˚
0.81 in / 21 mm
14.7 in / 373 mm
24.7 in / 628 mm
15.9 in / 405 mm
59 lb / 26.7 kg
14.7 in /
373 mm
Mounting Methods
Pole mount, integral rigging fl ybar, stack on top or fl y
underneath subwoofer(s), or fl y via 4 integrated M10 mounting
points (using M10 x 1.5 x 37 mm forged shoulder eyebolts). See
page 18 for more information.
Options
PA-A2 Forged Shoulder Eyebolt Kit (4 x M10 x 1.5mm x 37mm)
SPM200 Loudspeaker Pole Mount
FB121 HDA Flybar
Disclaimer
Since we are always striving to make our products better by
in cor po rat ing new and im proved ma te ri als, com po nents, and
man u fac tur ing methods, we re serve the right to change these
spec i fi ca tions at any time with out no tice.
"Mackie" and the "Running Man" fi gure are reg is tered
trade marks of LOUD Technologies Inc.
All other brand names men tioned are trade marks or registered
trademarks of their respective hold ers, and are hereby
ac knowl edged.
15.9 in /
405 mm
9.1 in /
232 mm
WEIGHT
59 lb
26.7 kg
©2010 LOUD Technologies Inc.
All Rights Reserved.