Table of Contents
Advertisement
TROUblesHOOTInG
sections
table of contents
Problem:
I am having difficulty setting up Wireless Protected Access (WPA) security on a Belkin wireless client card for a home network�
solution:
Clients must use the same key that the G Wireless Router or access point uses� For instance, if the key is "Smith Family Network Key" in the G
Wireless Router or access point, the clients must also use that same key�
1�
Double-click the "Signal Indicator" icon to bring up the "Wireless
Network Utility" screen� The "Advanced" button will allow you to
view and configure more options of your client card�
2�
Once the "Advanced" button is clicked, the Belkin Wireless Utility
will appear� This Utility will allow you to manage all the advanced
features of the Belkin wireless card�
3�
Under the "Wireless Network Properties" tab, select a
network name from the "Available Networks" list and click the
"Properties" button�
G+ MIMO Wireless Router
1
2
3
4
5
6
4�
Under "Network Authentication", select "WPA-PSK (no server)"�
5�
Type your WPA key in the "Network key" box�
Important: WPA-PSK is a combination of numbers and letters from
A-Z and 0-9� For WPA-PSK, you can enter eight to 63 characters� This
network key needs to match the key you assign to your Router�
6�
Click "OK", then "Apply" to save the settings�
89
7
8
9
10
Advertisement
Table of Contents
