Canon PowerShot SX280 HS User Manual page 137

• You can connect to computers that you have already connected to by choosing
them on the [Select a Device] screen in step 3.
• If you chose [PIN Method] in step 5, a PIN code will be displayed on the
screen. Be sure to set this code in the access point. Choose a device in the
[Select a Device] screen. For further details, refer to the user guide included
with your access point.
• To add multiple computers, repeat the above procedures starting from step 1.
• To disconnect from the camera, turn off the camera.
• When accessing the Wi-Fi menu from the second time by pressing the <o>
button, the most recently connected device will be displayed first, allowing
you to easily select it for connection. To add a new device, display the device
selection screen by pressing the <q><r> buttons, and then configure the
setting.
Connecting to Access Points in the List
1
View the listed access points.
z z
View the listed networks (access points)
as described in steps 1 – 3 of "Adding a
Computer"
2
Choose an access point.
z z Press the <o><p> buttons or turn the
<5> dial to choose a network (access
point), and then press the <m> button.
3
Enter the access point's
encryption key.
z z Press the <m> button to access the
keyboard, and then enter the encryption
key (=
z z Press the <o><p> buttons or turn the
<5> dial to choose [Next], and then
press the <m> button.
4
Choose [Auto].
z z Press the <o><p> buttons or turn the
<5> dial to choose [Auto], and then
press the <m> button.
X X A list of other devices connected to the
access point will appear in the [Select a
Device] screen.
(= 135).
134).
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Basic Guide
Advanced Guide
1
Camera Basics
2
Using GPS
Function
3
Auto Mode/
Hybrid Auto Mode
4
Other Shooting
Modes
5
P Mode
6
Tv, Av, and M
Mode
7
Playback Mode
8
Wi-Fi Functions
9
Setting Menu
10
Accessories
11
Appendix
Index
137