Shooting Tips - Canon EOS Rebel T5i 18-55mm IS STM Kit Instruction Manual

Shooting Tips

Change the ISO speed or use the built-in flash.
To match the subject and ambient lighting level, you can change the
ISO speed (p.92) or use the built-in flash (p.107). In the <d> mode,
the built-in flash will not fire automatically. So under low light, press
the <I> (flash) button to raise the built-in flash.
The program can be shifted. (Program shift)
After pressing the shutter button halfway, turn the <6> dial to
change the shutter speed and aperture setting combination
(program). Program shift is canceled automatically after the picture
is taken. Program shift is not possible with flash.
Differences Between <d> and <A> (Scene Intelligent Auto)
In the <A> mode, many functions such as the AF operation and metering
mode are set automatically to prevent spoiled shots. The functions you can
change are limited. Whereas in the <d> mode, only the shutter speed and
aperture are set automatically. You can freely set the AF operation, metering
mode, and other functions (p.314).
If the "30"" shutter speed and the maximum aperture
blink, it indicates underexposure. Increase the ISO
speed or use flash.
If the "4000" shutter speed and the minimum aperture
blink, it indicates overexposure. Decrease the ISO
speed.
d: Program AE
87