The LEDs on the front show how the Extender is working:
•
WPS. This LED indicates a WPS wireless connection.
-
Solid green. There is wireless security (WPA or WPA2).
-
Blinking green. A WPS connection is in progress.
•
PC to Extender. The LED is lit when the Extender is
connected to a PC.
•
Status. This LED is lit when the Extender is powered on.
•
Link Rate. This LED indicates a wireless connection
between the Extender and the router.
-
Green is best.
-
Amber is good.
-
Red is poor.
The side panel has the following features:
•
Ethernet port. You can use this for a wired connection to a
computer or other device as described in the User Manual.
•
Factory Reset button. To use this button, stick a paper clip into
the reset hole and hold it until the Status LED flashes.
•
WPS button. Press the WPS button to wirelessly connect
the Extender to your router or wireless adapter.
•
Device On/Off button. Turns the device on and off.
4