Download Print this page

Behringer DIGITAL DELAY DD600 User Manual

Digital stereo delay/echo effects pedal

Advertisement

Quick Links

DIGITAL DELAY DD600
Digital Stereo Delay/Echo Effects Pedal
Thank you for showing your confidence in us by purchasing the BEHRINGER DIGITAL DELAY DD600.
This digital Delay effects pedal is designed to deliver 24-bit high-resolution stereo delay sounds
comparable to state-of-the-art studio processors. Thanks to its parameter controls, you'll have
plenty of cool sounds at your disposal to handle every situation.
1. Controls
(1) Select the effect mode via the MODE
switch (see table below).
(2) Use the D.TIME control to fine-tune the
delay time. The delay time describes
how fast the signal repetitions will
follow after the original signal.
Depending on the selected mode,
you can adjust it between 1 ms and
2000 ms. In HOLD and TEMPO modes,
D.TIME is disabled.
(3) The F.BACK (feedback) control adjusts
the amount of signal repetitions.
In HOLD mode, F.BACK is disabled.
(4) LEVEL adjusts the effect level.
(5) Use the ¼" TS IN connector to plug in
the instrument cable.
(6) Use the ¼" TS TEMPO connector to
connect an external foot switch.
Use the foot switch to tap in the song
tempo (in TEMPO MODE).
(7) The ¼" TS OUT A connector sends a mono signal to your amp. In E/D mode, it sends the
effect signal only.
(8) Use the PAN OUT connector and OUT A to acheive a full stereo delay effect. In E/D mode,
it sends the dry signal only.
(9) The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator.
(10) Use the foot switch to activate/deactivate the effect. In HOLD mode, use the foot switch to start
and stop the recording. The signal is recorded while holding down the foot switch. Playback begins
immediately after releasing it.
MODE
1
2
DELAY
3
4
5
HOLD
6
REVERSE
7
E/D
8
9
TEMPO
10
11
(3)
(4)
(9)
(8)
(7)
Effect Description
Short delay
Short to medium delay
Medium to long delay
Long delay
Record and playback your performance
Signal is repeated in reverse
Stereo delay using OUT A and PAN OUT
Adds a quarter note
Adds an eighth note
Adds a dotted eighth note
Add a triplet
D.Time
1-50 ms
50-200 ms
200-800 ms
800-2000 ms
(Rec.time: max.2 s)
1000-2000 ms
1-400 ms
D.TIME disabled.
Tap tempo via external foot switch
(2)
(1)
(5)
(6)
(10)

Advertisement

loading

Summary of Contents for Behringer DIGITAL DELAY DD600

  • Page 1 DIGITAL DELAY DD600 Digital Stereo Delay/Echo Effects Pedal Thank you for showing your confidence in us by purchasing the BEHRINGER DIGITAL DELAY DD600. This digital Delay effects pedal is designed to deliver 24-bit high-resolution stereo delay sounds comparable to state-of-the-art studio processors. Thanks to its parameter controls, you’ll have plenty of cool sounds at your disposal to handle every situation.
  • Page 2: Specifications

    100 V~, 50 - 60 Hz TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN.