3/4/5)
CPU_FAN/SYS_FAN1/SYS_FAN2/PWR_FAN (Fan Headers)
The motherboard has a 4-pin CPU fan header (CPU_FAN), a 4-pin (SYS_FAN1) and a 3-pin (SYS_
FAN2) system fans, and a 3-pin power fan. Most fan headers possess a foolproof insertion design. When
connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is the
ground wire). The motherboard supports CPU fan speed control, which requires the use of a CPU fan
with fan speed control design. For optimum heat dissipation, it is recommended that a system fan be
installed inside the chassis.
• Be sure to connect fan cables to the fan headers to prevent your CPU and system from over-
heating. Overheating may result in damage to the CPU or the system may hang.
• These fan headers are not configuration jumper blocks. Do not place a jumper cap on the
headers.
Hardware Installation
CPU_FAN:
Pin No. Definition
1
1
2
CPU_FAN
3
4
SYS_FAN1:
Pin No. Definition
1
1
2
3
SYS_FAN1
4
SYS_FAN2/PWR_FAN:
Pin No. Definition
1
2
1
SYS_FAN2/PWR_FAN
3
- 24 -
GND
+12V / Speed Control
Sense
Speed Control
GND
+12V / Speed Control
Sense
Reserve
GND
+12V
Sense