Krell Industries S-300i Instructions For Use Manual page 2

S - 3 0 0 i
Remote Control Integrated Amplifier
Instructions for Use
v 1.0
C O N TACT
I N F O R M AT I O N
WA R N I N G S
© 2008 by Krell Industries, Inc. All rights reserved
Krell Industries, Inc.
45 Connair Road
Orange, CT 06477-3650 USA
T E L 2 0 3 - 7 9 9 - 9 9 5 4
FAX 203-891-2028
E - M A I L k r e l l @ k r e l l o n l i n e . c o m
WEBSITE http://www. k r e l l o n l i n e . c o m
Do not place the integrated amplifier where it could be exposed to dripping or
s p l a s h i n g .
The ventilation grids on the top and bottom of the S-300i must be unobstructed at
all times during operation. Do not place flammable material on top of or beneath
the component.
When making connections to this or any other component, make sure all compo-
nents are off. Turn off all systems' power before connecting the S-300i to any
other component. Make sure all cable terminations are of the highest quality, free
from frayed ends, short circuits, or cold solder joints.
THERE ARE NO USER-SERVICEABLE PA RTS INSIDE A N Y K R E L L P R O D U C T.
Please contact your authorized dealer, distributor, or Krell if you have any ques-
tions not addressed in this reference manual.
K r e l l ® is a registered trademark of Krell Industries, Inc., and is restricted for use by Krell Industries, Inc., its
subsidiaries, and authorized agents. Krell Current Mode™ and Theater Throughput™ are trademarks of
Krell Industries, Inc. All other trademarks and tradenames are registered to their respective companies.