Krell Industries Resolution Quick Setup Manual

THE LEADER IN AUDIO ENGINEERING
Getting Started
WARNINGS
THERE ARE NO USER-SERVICE-
ABLE PARTS INSIDE ANY KRELL
PRODUCT.
Unpacking
Note
Save all packing materials. If
you need to ship a Resolution
Series loudspeaker in the future,
repack the unit in its original
packaging to prevent shipping
damage.
This product complies with the EMC directive (89/336/EEC) and
the low-voltage directive (73/23/EEC).
Thank you for your purchase of the Resolution Subwoofer, a powered subwoofer in
the Resolution Series of loudspeakers.
The Resolution Subwoofer delivers large amounts of sustained low frequency infor-
mation without reservation. Excellent cabinet construction, robust driver selection
and 650 watts of genuine Krell amplification combine to offer the huge output, speed
and resolution necessary for the ultimate home theater or music system experience.
The Resolution Subwoofer features a one-inch MDF enclosure with 2-inch thick front
and rear baffles. The sealed box design promotes clean, accurate bass. A separate
control cavity completely isolates electronics package from the driver.
The single 15-inch driver has a very stiff, reinforced polypropylene cone. Peak to
Peak linear travel is 1-3/8-inch, and the voice coil is extra long. Motor geometry fea-
tures a focused magnetic field that promotes control and lowers distortion.
The 650 watt Krell Current Mode power amplifier is a Class AB design featuring a
1000 watt transformer and 55,000 microfarads of filter capacitance. Class AB amplifi-
cation provides power quickly and sustains power indefinitely, thereby providing
complete control of the driver under the most demanding conditions.
This document outlines the basic steps for unpacking, placing, connecting, and oper-
ating the Resolution Subwoofer. The owner's reference for this product, including a
detailed description of features and the product warranty, is available on the web at:
www.krellonline.com
Please contact your authorized dealer, distributor, or Krell if you have any ques-
tions not addressed in the owner's reference.
Follow these steps to safely unpack your subwoofer:
1. Set the shipping box right side up using the arrows on the box as a guide.
2 people needed
2. Use a box-cutting knife and slit the tape all along the top seams of the outer
carton.
3. Open the flaps to reveal the inner carton.
4. Slit the tape along the top seams of the inner carton.
5. Open the flaps and remove the power cord and two cardboard boxes, marked
"accessories" and "grille", and set aside.
6. Carefully invert the box, so that the top foam piece is on the floor. Make certain
that the subwoofer stays inside the carton as you bring it to the vertical position.
2 people needed
7. Kneel down and grasp the top foam piece.
8. Carefully lift the inner and outer cartons straight up, and off the box. The sub-
woofer is still inverted.
9. Remove the bottom foam piece.
10. Set the inner and outer cartons and the bottom foam piece aside.
11. Gently slide the protective sleeve around the subwoofer down, toward the top of
the subwoofer and toward the top foam piece on the floor.
Resolution Subwoofer
Powered Subwoofer
QUICK SETUP GUIDE
Krell Resolution Subwoofer 1