Maintenance - Honda EXW171S Owner's Manual

7. MAINTENANCE
Periodic maintenance and adjustment are necessary to keep the
generator/welder in good operating condition. Perform the service and in-
spection scheduled in the table on the following page.
m Shut off the engine before performing any maintenance. If the
engine must be run, make sure the area is well ventilated.
Exhaust contains poisonous carbon monoxide gas; exposure may cause
loss of consciousness and may lead to death.
CAUTION: Use only genuine HONDA parts or their equivalent for
maintenance or repair. Replacement parts which are not of equivalent
quality may damage the generator/welder.
Tool kit
The tools supplied with the generator will help you to perform the owner-
maintenance procedures listed on the following page. Always keep this
tool kit with the generator/welder.
10 x 12 mm WRENCH
U
SCREW DRIVER
DRIVER GRIP
PLUG WRENCH HANDLE
IB
PLUG WRENCH
TOOL BAG
27