Table of Contents
Advertisement
Universal Remote control
The remote control cannot be operated unless the batteries are properly loaded.
When using the remote control, aim it at the remote control sensor on the TV.
Function introduction
Press to turn on and off the TV
Open the channel list.
Shortcut Button of Input
PRE-DAY: Press to enter PRE-DAY signal;
NEXT DAY: Press to enter NEXT DAY signal;
PAGE-: Press to enter PAGE- signal;
PAGE+: Press to enter PAGE+ signal.
Selects the sound appropriate for the
program's character.
Selects the picture appropriate
for the program's character.
CC(closed caption)
Select a closed caption:
CC MUTE, CC ON, CC OFF.
Brings up the main menu to the screen.
Shows program schedule.
Clears all on-screen displays and
returns toTV viewing from any menu.
Switches the sound on or off
(Aspect Ratio Control)
Changes the aspect ratio.
It is not available under pip mode.
It is available under pop mode.
VOLUME UP/DOWN
Press to adjust the volume.
Numeric buttons
Press to change the channel.
Press to select additional channels
(digital and analog)
being broadcast by the same station.
For example, to select channel"54-3",
press "54", then press "-" and "3".
8 TV LCD-TFT
POWER
.
CH.LIST
TV
DVD
VCR SETBOX CABLE AUDIO
CH.LIST
FAV.LIST
PRE-DAY
NEXT DAY
S.MODE
P.MODE
P.MODE
CC
MENU
GUIDE
MUTE
EXIT
VOL+
VOL-
MUTE
ARC
- button
FAV.LIST
Open the favorite channel list.
TV DVD VCR SETBOX CABLE AUDIO
Press the SELECT button repeatedly to select
one of the system modes in which the remote
control can be used. When the desired device is
selected, the corresponding LED lights on 5seconds.
ADD/ERASE
SELECT
Add or erase favorite program.
ADD/ERASE
VCR/DVD Functions
PAGE-
PAGE+
Control some video cassette recorders or
DVD players.
/
/
S.MODE
FREEZE
FREEZE
Freezes the currently-viewed picture, but
audio continues. Press FREEZE button again
to resume the normal picture.
INPUT
show the input source mode.
OK
INFO
When you watch the TV, press the key, the
information displays on bottom of the screen.
THUMBSTICK
(Up/Down/Left/Right/OK)
Allows you to navigate the on-screen
menus and adjust the system settings
to your preference.
CH+
SLEEP button
Displays the Sleep Timer option.
CH-
LIGHT
Press the light button, white LED will be
ON, release this key, white LED will be OFF.
SAP
Selects MTS sound: Mono, Stereo, and
SAP in Analog mode. Change the audio
language in DTV mode.
CHANNEL UP/DOWN
Press to scan through channels. To
scan quickly through channels, press
Q.VIEW
and hold down either +/- .
Q.VIEW
Switch the current channel to the
last channel you have viewed, or
switch the other source to TV.
Introduction
Rewind / Fast
backward /Forward
Stop
Play/Pause
REC
Advertisement
Table of Contents
