Download
Share
Print this page
Avaya PARTNER PC CARD Installation Instructions
  1. Manuals
  2. Brands
  3. Avaya Manuals
  4. Computer Hardware
  5. PARTNER PC CARD
  6. Installation instructions
Avaya PARTNER PC CARD Installation Instructions

Avaya PARTNER PC CARD Installation Instructions

Hide thumbs
1
2
3
4

Advertisement

Quick Links

Download this manual
PARTNER PC CARD

Installation Instructions

This PC Card is used with a PARTNER
designed for any one of the following types of PC Cards:
Backup/Restore Card
Software Upgrade Card (for one-time upgrade only)
Automatic System Answer/Direct Extension Dialing (ASA/DXD) Card
®
PARTNER
Remote Access PC Card
The PARTNER Remote Access PC Card is a multi-purpose card that accompanies all
PARTNER ACS Release 3.0 and later processors. This PC Card can be used to upgrade
previous versions of PARTNER ACS Release 3.0 and later to perform backup and restore
functions. With additional software (for the PC, not the PARTNER system), the PARTNER
Remote Access PC Card can also be used to administer the PARTNER system from local and
remote locations using a PC.
WARNING:
Remove all other PC Cards from the processor before initiating an upgrade.

Important Safety Instructions

WARNING:
The following list provides basic safety precautions that should always be followed when using this product:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Do not drop, bend, or crush the card.
4. Keep the card away from moisture, high temperatures, and direct sunlight.
5. Keep the connector on the card clean.
CAUTION:
Before starting, verify that you have batteries properly installed in the processor module. Extension 10 will
show ChgBat W/PowerOn or ReplaceSysBat W/Power On on the display if the batteries need to be
replaced, or if they are not installed properly. To avoid damage to the processor module or to the card, do not
install or remove the card when power is on.
Copyright 2003
Avaya Inc.
All rights reserved
Printed in U.S.A.
®
Advanced Communications System (ACS). These instructions are
SAVE THESE INSTRUCTIONS
Document Number 518-457-101
PARTNER is a registered trademark of Avaya Inc.
Comcode: 700292501
August 2003 (Issue 7)

Advertisement

loading

Related Manuals for Avaya PARTNER PC CARD

Summary of Contents for Avaya PARTNER PC CARD

  • Page 1: Installation Instructions

    To avoid damage to the processor module or to the card, do not install or remove the card when power is on. SAVE THESE INSTRUCTIONS Copyright 2003 Document Number 518-457-101 Avaya Inc. Comcode: 700292501 All rights reserved August 2003 (Issue 7) Printed in U.S.A. PARTNER is a registered trademark of Avaya Inc.
  • Page 2 Power down the system before inserting or removing a PC Card. A) If you have a Stand-alone or 2-Slot Carrier, unplug the power cord from the wall outlet and disconnect the power cord from the power jack on the carrier. B) If you have a 5-Slot Carrier, move the carrier’s On/Off switch to Off (“O”) and unplug the power cord from the wall outlet.
  • Page 3 B) If multiple lights are out, power down the control unit, reseat the leftmost module that has a light out, then power up the control unit. C) If the lights are still out, contact your local Authorized Dealer or, in the continental U.S. only, call the Avaya Customer Care Center at 1 800 628-2888 (for PARTNER ACS).
  • Page 4 If you are upgrading your system and you have verified that the upgrade was successful by using Feature 59, do the following: A) If you are using a one time use upgrade card, power down the system by following the instructions in Step 1.