Gigabyte GA-Z68X-UD4-B3 User Manual page 43

tRFC
Options are: Auto (default), 1~255.
tRTP
Options are: Auto (default), 1~15.
tFAW
Options are: Auto (default), 1~63.
Command Rate(CMD)
Options are: Auto (default), 1~3.
>>>>> Channel A/B Misc Timing Control
IO Latency
Options are: Auto (default), 1~31.
Round Trip Latency
Options are: Auto (default), 1~255.
 Advanced Voltage Settings
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
****** Mother Board Voltage Control ******
Voltage Types
-----------------------------------------------------------------------------
>>> CPU
Multi-Steps Load-Line
CPU Vcore
x Dynamic Vcore(DVID)
QPI/Vtt Voltage
System Agent Voltage
>>> MCH/ICH
CPU PLL
>>> DRAM
DRAM Voltage
DRAM VRef.
DRAM Termination
Ch-A Data VRef.
Ch-B Data VRef.
Ch-A Address VRef.
Ch-B Address VRef.
higf: Move Enter: Select
F5: Previous Values
>>> CPU
Multi-Steps Load-Line
Enables or disables Load-Line Calibration. This item allows you to adjust Vdroop at different levels. En-
abling Load-Line Calibration may keep the CPU voltage more constant under light and heavy CPU load.
Disabled Disables Load-Line Calibration and sets VDroop following Intel specifications.
(Default)
Level 1~Level 10 Enables Load-Line Calibration and adjusts VDroop by ten levels.
CPU Vcore
The default is Auto.
Dynamic Vcore(DVID)
This option is configurable only when CPU Vcore is set to Normal. The default is Auto.
QPI/Vtt Voltage
The default is Auto.
System Agent Voltage
The default is Auto.
Advanced Voltage Settings
Normal Current
[Disabled]
1.220V [Auto]
+0.000V Auto
1.050V [Auto]
0.920V [Auto]
1.800V [Auto]
1.500V [Auto]
0.750V [Auto]
0.750V [Auto]
0.750V [Auto]
0.750V [Auto]
0.750V [Auto]
0.750V [Auto]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 43 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup