Gigabyte GA-X58A-UD9 User Manual page 108

When completed, you can see the new array under Topology\Virtual Disks (Figure 6).
Topology
HBA 0 : Marvell 0
Virtual Disks
VD 0: New_VD
PD 0: WDC WD800JD-22L
PD 8: WDC WD800JD-22L
Free Physical Disks
Help
Marvell RAID on chip controller.
ENTER: Operation F10: Exit/Save ESC: Return
7. Save the Settings and Exit. After you complete the RAID configuration and before you exit the configura-
tion screen, be sure to press <F10> in the main screen. Press <Y> to confirm or <N> to cancel (Figure 7).
Topology
HBA 0 : Marvell 0
Virtual Disks
VD 0: New_VD
PD 0: WDC WD800JD-22L
PD 0: WDC WD800JD-22L
Free Physical Disks
Help
Marvell RAID on chip controller.
ENTER: Operation F10: Exit/Save ESC: Return
Appendix
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
Information
Vendor ID
Device ID
Revision ID
BIOS Version
Firmware Version
PCIe Speed rate
Configure SATA as :
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
Vendor ID
Device ID
Revision ID
BIOS Version
Firmware Version
PCIe Speed rate
Configure SATA as :
Exit
Do you want to exit from Marvell BIOS Setup?
Yes
:
:
:
:
:
:
Figure 6
Information
:
:
:
:
:
:
No
Figure 7
- 108 -
1B4B
91A3
B1
1.0.0.1006
2.1.0.1314
2.56Gbps
IDE Mode
1B4B
91A3
B1
1.0.0.1006
2.1.0.1314
2.56Gbps
IDE Mode