Gigabyte GA-P67A-UD7-B3 User Manual page 27

3/4/5) CPU_FAN/SYS_FAN1/SYS_FAN2/SYS_FAN3/PWR_FAN (Fan Headers)
The motherboard has a 4-pin CPU fan header (CPU_FAN), a 4-pin (SYS_FAN3) and two 3-pin (SYS_
FAN1/SYS_FAN2) system fan headers, and a 3-pin power fan header (PWR_FAN). Most fan headers
possess a foolproof insertion design. When connecting a fan cable, be sure to connect it in the correct
orientation (the black connector wire is the ground wire). The motherboard supports CPU fan speed con-
trol, which requires the use of a CPU fan with fan speed control design. For optimum heat dissipation, it
is recommended that a system fan be installed inside the chassis.
6) PCH_FAN (Chipset Fan Header)
Connect the Chipset fan cable to this header. The fan header has a foolproof insertion design. When
connecting a fan cable, be sure to connect it in the correct orientation. Most fans are designed with color-
coded power connector wires. A red power connector wire indicates a positive connection and requires a
+12V voltage. The black connector wire is the ground wire.
• Be sure to connect fan cables to the fan headers to prevent your CPU, Chipset and system from overheating.
Overheating may result in damage to the CPU/Chipset or the system may hang.
• These fan headers are not configuration jumper blocks. Do not place a jumper cap on the headers.
CPU_FAN:
Pin No. Definition
1
CPU_FAN
SYS_FAN3:
Pin No. Definition
1
SYS_FAN3
SYS_FAN1/PWR_FAN:
Pin No. Definition
1
1
SYS_FAN1 PWR_FAN
SYS_FAN2:
Pin No. Definition
1
SYS_FAN2
Pin No. Definition
1
- 27 -
1 GND
2 +12V / Speed Control
3 Sense
4 Speed Control
1 GND
2 +12V / Speed Control
3 Sense
4 Reserve
1 GND
2 +12V
3 Sense
1 GND
2 +12V / Speed Control
3 Sense
1 GND
2 +12V
3 NC
Hardware Installation