F_Usb1/F_Usb2/F_Usb3/F_Usb4; F_1394 Ieee 1394A Header - Gigabyte GA-H57M-USB3 User Manual

15) F_USB1/F_USB2/F_USB3/F_USB4 (USB Headers)
The headers conform to USB 2.0/1.1 specification. Each USB header can provide two USB ports via an
UG
optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer.
T
16) F_1394 (IEEE 1394a Header)
The header conforms to IEEE 1394a specification. The IEEE 1394a header can provide one IEEE 1394a
UG
port via an optional IEEE 1394a bracket. For purchasing the optional IEEE 1394a bracket, please con-
T
tact the local dealer.
Hardware Installation
When the system is in S4/S5 mode, only the USB ports routed to the F_USB1 header can sup-
port the ON/OFF Charge function.
• Do not plug the IEEE 1394 bracket (2x5-pin) cable into the USB header.
• Prior to installing the USB bracket, be sure to turn off your computer and unplug the power
cord from the power outlet to prevent damage to the USB bracket.
• Do not plug the USB bracket cable into the IEEE 1394a header.
• Prior to installing the IEEE 1394a bracket, be sure to turn off your computer and unplug the
power cord from the power outlet to prevent damage to the IEEE 1394a bracket.
• To connect an IEEE 1394a device, attach one end of the device cable to your computer and
then attach the other end of the cable to the IEEE 1394a device. Ensure that the cable is se-
curely connected.
Pin No.
1
2
9 1
3
10 2
4
5
6
7
8
9
10
Pin No.
1
9 1
2
10 2
3
4
5
6
7
8
9
10
- 30 -
Definition
Power (5V)
Power (5V)
USB DX-
USB DY-
USB DX+
USB DY+
GND
GND
No Pin
NC
Definition
TPA+
TPA-
GND
GND
TPB+
TPB-
Power (12V)
Power (12V)
No Pin
GND