Connection During Two-Screen/Four-Screen Mode Display - Barco D-ILA LX-5 User Manual

LX-5_EN.book Page 20 Friday, July 4, 2008 9:35 AM
Connection and Installation
Connecting Video Signals of
the Computer (Cont'd)
Connection During Two-Screen/Four-
Screen Mode Display
The two-screen/four-screen mode enables simultaneous display of signals from two or four computers.
To select the two-screen mode, set "Display Mode" in the Setting menu to "Double". To select the four-screen mode, set it
to "Cross". (A Page 33)
Possible Input Signals and Projected Image
Computer 1, Computer 2
Resolution
2048 1200
2048 1080
1920 1200
1920 1080
1600 1200
1280 1024
1024 768
800 600
640 480
NOTE:
● This projector converts the frame rate to 60 Hz regardless of the synchronizing signal frequency at the computer's end.
● The respective signals are displayed at the center of the split screen.
● When in the two-screen mode, the screen appears blue (or black depending on the setting) when there is no input.
Two-Screen Mode
(Example) DVI 1: 1920 1080,
DVI 3: 1920 1080
4096
2400 DVI 1
2048
Channel Link Status
1ch Single
1ch Single
1ch Single
1ch Single
1ch Single
1ch Single
1ch Single
1ch Single
1ch Single
Four-Screen Mode
(Example) DVI 1: 2048 1200, DVI 2: 1920 1080,
DVI 3
2400
Output Status
Normal 2048 1200
Normal 2048 1080
Normal 1920 1200
Normal 1920 1080
Normal 1600 1200
Normal 1280 1024
Normal
Normal
Normal
DVI 3: 1024 768, DVI 4: 1600 1200
4096
DVI 2
DVI 1
DVI 3 DVI 4
2048
1024 768
800 600
640 480
1200