Table of Contents
Advertisement
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
1
While in CD Stop mode, press the
PROG. button; the track number and
PRG
indicator
the display.
3
1
Press
the
POWER
PAUSE ®p button 1 to begin
Programmed playback; the PRG
indicator will appear. Adjust the
VOLUME control ƒ as desired.
NOTES:
•
Programming is the ability to preselect the order in which a series of tracks
will be played.
•
Each track may be stored in the program memory as many times as
desired up to 20 tracks.
•
Press the POWER OFF/STOP I button to stop the disc before it is
finished.
•
To clear the memorized program, press the POWER OFF/STOP I button
again while in the Stop mode, wait approx. 60 seconds and the unit will
turn off or open the CD compartment.
OPERATION (CONTINUED)
will
blink
2
ON/PLAY/
2
Select the first track to be played
back using the SKIP/SEARCH o 1
in
or n 2 button, then press the
PROG. button „ again. Repeat this
step to program additional tracks
(up to 20 tracks).
4
To skip forward or backward
through the programs, press the
SKIP/SEARCH o 1 or n 2 button.
When the disc is through playing, it
will stop.
14
2
1
3
2
1
Advertisement
Table of Contents
