BMW Z4 3.0i Owner's Manual page 109

engine is cold. It is recommended to start the
engine using jumper cables, refer to
page 104.<
1. Switch on hazard warning flashers, comply
with local regulations.
2. Turn the key to position 2.
3. Shift into 3rd gear.
4. Have the vehicle tow-started with the clutch
depressed and slowly release the clutch.
After the engine starts, immediately
depress the clutch again.
5. Stop at a suitable location, remove the tow
bar or rope and switch off the hazard warn-
ing flashers.
6. Have the vehicle checked.
Online Edition for Part no. 01 41 0 013 320 - © 02/07 BMW AG
107