Sony HDR-PJ790V "Handycam User Manual page 126

"Handycam" User Guide
Operation Search
Before use
Getting started
Recording
Playback
Playing images on a TV
Saving images with an external
device
Using the Wi-Fi function
Customizing your camcorder
Troubleshooting
Maintenance and precautions
Contents list
Top page > Using the Wi-Fi function > Available menus with the wireless adaptor attached > WPS Push
WPS Push
If your access point has a WPS button, you can register the access point to the camcorder easily.
1. Select [Setup]
2. Press the WPS button on the access point you want to register.
Notes
[WPS Push] requires that the security of the access point be WPA or WPA2 and that the WPS
push button method is supported. If the security of your access point is set to WEP and your
access point does not support the WPS push button method, register the access point manually.
[Details]
For details on the supported functions and settings for your access point, refer to the manual of
your access point or contact the administrator of your access point.
Depending on the surrounding conditions such as obstacles between the camcorder and access
point, signal condition and the materials of the wall, etc., connections may not be established or the
communication distance may be shorter. Move the camcorder or decrease the distance between the
camcorder and the access point.
Copyright 2013 Sony Corporation
126
[ Connection] [WPS Push].
Search Print
Back to top