Related Manuals for Canon 4344B005
Summary of Contents for Canon 4344B005
- Page 1 Camera User Guide • Make sure you read this guide, including the "Safety Precautions" section, before using the camera. • Store this guide safely so that you can use it in the future. ENGLISH...
-
Page 2: Checking The Package Contents
Checking the Package Contents Check if the following items are included in your camera package. If anything is missing, contact the retailer from which you purchased the camera. Lens Cap Battery Pack NB-7L Battery Charger Camera (with Terminal Cover) CB-2LZ/CB-2LZE (includes hot shoe cap) Interface Cable Stereo AV Cable... -
Page 3: Read This First
Test Shots and Disclaimer Take some initial test shots and play them back to make sure the images were recorded correctly. Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages... -
Page 4: What Do You Want To Do
What Do You Want to Do? Shoot ● Shoot, leaving it to the camera to make settings ......25 Take good people shots Portraits At the beach Against snow (p. 62) (p. 64) (p. 64) Shoot various other scenes Landscape Sports Low Light Foliage Fireworks... - Page 5 What Do You Want to Do? View ● Look at my pictures ..............28 ● Automatically play back pictures (slideshow)......123 ● Look at my pictures on a TV ............127 ● Look at my pictures on a computer..........33 ● Quickly search pictures ............120, ●...
-
Page 6: Table Of Contents
Table of Contents Chapters 1 – 3 explain the basic operations and frequently used functions of this camera. Chapters 4 onward explain the advanced functions, letting you learn more as you read each chapter. Checking the Package Contents ..2 MENU – Basic Operations ....49 Read This First ........3 Changing the Sound Settings .. - Page 7 Table of Contents Changing the Recording Pixel Setting Setting the Shutter Speed and (Image Size)........74 Aperture Value ........ 97 Changing the Compression Ratio Correcting the Brightness and (Image Quality) ....... 74 Shooting (i-Contrast) ....... 98 Changing the ISO Speed ....76 Red-Eye Correction......
- Page 8 Table of Contents Displaying Various Images (Smart 9 Customizing Camera Shuffle) ..........125 Settings......151 Changing Image Transitions..126 Changing Camera Settings ... 152 Viewing Images on a TV....127 Changing Shooting Viewing Images on a Function Settings ......158 High-Definition TV......128 Registering Commonly Used Shooting Protecting Images......129 Menus (My Menu) ......
-
Page 9: Safety Precautions
If the battery charger becomes wet, unplug it from the outlet and consult your camera distributor or the closest Canon Customer Support Help Desk. • Do not play the supplied CD-ROM(s) in any CD player that does not support data CD-ROMs. - Page 10 Safety Precautions • Use only the recommended battery. • Do not place the battery near or in direct flame. • Unplug the power cord periodically and wipe away any dust and dirt that has collected on the plug, the exterior of the power outlet, and the surrounding area. •...
- Page 11 Safety Precautions • When using the camera on a beach or at a windy location, be careful not to allow dust or sand to enter the camera. This may cause the camera to malfunction. • In regular use, small amounts of smoke may be emitted from the flash. This is due to the high intensity of the flash burning dust and foreign materials stuck to the front of the unit.
-
Page 12: Conventions Used In This Guide
Conventions Used in This Guide • Icons are used in the text to represent the camera buttons and control dial. • Language that displays on the screen appears inside [ ] (square brackets). • The directional buttons, control dial, and FUNC./SET button are represented by the following icons. -
Page 13: View Movies
Getting Started This chapter explains preparations before shooting, how to shoot in A mode, and then how to view and erase the images you take. The latter part of this chapter explains how to shoot and view movies and transfer images to a computer. Attaching Included Items/Holding the Camera •... -
Page 14: Charging The Battery
Charging the Battery Use the included charger to charge the battery. Be sure to charge the battery as it is not charged at the time of purchase. Remove the cover. Insert the battery. ● Align the o marks on the battery and charger, then insert the battery by sliding it in ( ) and down (... -
Page 15: Number Of Shots Can Be Taken
This is a normal characteristic of the battery and does not indicate a problem. However, if the battery bulges to the point where it will no longer fit into the camera, please contact a Canon Customer Support Help Desk. •... -
Page 16: Compatible Memory Cards (Sold Separately)
Compatible Memory Cards (Sold Separately) • SD memory cards (2 GB and less)* • SDHC memory cards (more than 2 GB, up to and including 32 GB)* • SDXC memory cards (more than 32 GB)* • MultiMediaCards • MMCplus memory cards •... -
Page 17: Insert The Memory Card
Inserting the Battery and Memory Card Open the cover. ● Slide the cover ( ) and open it ( Insert the battery. ● Insert the battery as shown until it locks into place with a click. ● Be sure to insert the battery in the correct direction or it will not properly lock into place. -
Page 18: Removing The Battery And Memory Card
Inserting the Battery and Memory Card Removing the Battery and Memory Card Remove the battery. ● Open the cover and press the battery lock in the direction of the arrow. The battery will pop up. Remove the memory card. ● Push the memory card in until you hear a click, then slowly release it. -
Page 19: Using The Screen
Using the Screen Open the screen. ● Open the screen ( ), and rotate it forward 180°( ● Close the screen ( Adjusting the position of the screen Approx. 180° •You can freely adjust the angle and orientation of Approx. 90° the screen as you like for the shooting conditions. -
Page 20: Setting The Date And Time
Setting the Date and Time The Date/Time settings screen will appear the first time the camera is turned on. Since the dates and times recorded into your images are based on these settings, be sure to set them. Turn on the camera. ●... -
Page 21: Changing The Date And Time
Setting the Date and Time Changing the Date and Time You can change the current date and time settings. Display the menus. ● Press the n button. Choose [Date/Time] in the 3 tab. Press the qr buttons to choose the 3 ●... -
Page 22: Setting The Display Language
Setting the Display Language You can change the language that displays on the screen. Enter Playback mode. ● Press the 1 button. Display the settings screen. ● Press and hold the m button, then immediately press the n button. Set the display language. ●... -
Page 23: Formatting Memory Cards
Formatting Memory Cards Before you use a new memory card or one that has been formatted in other devices, you should format the card with this camera. Formatting (initializing) a memory card erases all data on the memory card. As you cannot retrieve the erased data, exercise adequate caution before formatting the memory card. -
Page 24: Pressing The Shutter Button
Pressing the Shutter Button Formatting or erasing data on a memory card merely changes the file management information on the card and does not ensure its contents are completely erased. Be careful when transferring or disposing of a memory card. When disposing of a memory card, take precautions such as physically destroying the card to prevent personal information leaks. -
Page 25: Taking Pictures (Smart Auto)
Taking Pictures (Smart Auto) Since the camera can determine the subject and shooting conditions, you can let it automatically select the best settings for the scene and just shoot. The camera can also detect and focus on faces, setting the color and brightness to optimal levels. - Page 26 Taking Pictures (Smart Auto) When the camera focuses, it will beep twice and AF frames will appear where the camera focused. Several AF frames will appear when the camera focuses on more than one point. ● If [Raise the flash] appears on the screen, you should use the flash to shoot.
- Page 27 Taking Pictures (Smart Auto) What if... • What if the color and brightness of the images do not turn out as expected? The scene icon (p. 180) that appears on the screen may not match the actual scene. If this happens, try shooting in G mode 71).
-
Page 28: Viewing Images
Viewing Images You can view the images you have taken on the screen. Enter Playback mode. ● Press the 1 button. The last image you took will appear. Choose an image. Pressing q or turning the  dial counter- ● clockwise will cycle through the images in the reverse order they were taken, from the newest image to the oldest. -
Page 29: Erasing Images
Erasing Images You can choose and erase images one at a time. Please note that erased images cannot be recovered. Exercise adequate caution before erasing an image. Enter Playback mode. ● Press the 1 button. The last image you took will appear. Choose an image to erase. -
Page 30: Shooting Movies
Shooting Movies The camera can automatically select all settings so that you can shoot movies just by pressing the movie button. The audio will record in stereo. Choose A mode. ● Set the mode dial to A. Remaining Time Compose the shot. ●... -
Page 31: Stop Shooting
Shooting Movies ● Do not touch the microphone while shooting. ● Do not press any buttons other than the movie button while shooting. The sound the Microphone buttons make will be recorded in the movie. Stop shooting. ● Press the movie button again. The camera will beep twice and stop shooting the movie. -
Page 32: Viewing Movies
Viewing Movies You can view the movies you have shot on the screen. Enter Playback mode. ● Press the 1 button. The last image you took will appear. appears on movies. Choose a movie. Press the qr buttons or turn the  dial to ●... -
Page 33: Transferring Images To A Computer For Viewing
You can use the included software to transfer images you have shot with the camera to a computer for viewing. If you are already using software included with another Canon-brand compact digital camera, install the software from the included CD-ROM, overwriting your current installation. -
Page 34: Install The Software
Transferring Images to a Computer for Viewing Macintosh Mac OS X (v10.4 – v10.6) Computer model The above OS should be pre-installed on computers with built-in USB ports. PowerPC G4/G5 or Intel Processor (still images), Core Duo 1.66 GHz or higher (movies) Mac OS X v10.4 –... - Page 35 Transferring Images to a Computer for Viewing When the installation finishes, click [Restart] or [Finish]. Remove the CD-ROM. ● Remove the CD-ROM when your desktop screen appears. Macintosh Place the CD in the computer’s CD- ROM drive. ● Place the supplied CD-ROM (DIGITAL CAMERA Solution Disk) (p.
-
Page 36: Turn On The Camera
For Windows 7, use the following steps to display CameraWindow. Click on the task bar. In the screen that appears, click the link to modify the program. Choose [Downloads Images From Canon Camera using Canon CameraWindow] and click [OK]. Double click... -
Page 37: Transfer And View Images
Transferring Images to a Computer for Viewing Transfer and View Images ● Click [Import Images from Camera], and then click [Import Untransferred Images]. All images not previously transferred will transfer to the computer. Transferred images will be sorted by date and saved in separate folders in the Pictures folder. -
Page 38: Accessories
Solution Disk Lens Cap Stereo AV Cable AVC-DC400ST* Case for Hot Shoe Cap (includes hot shoe cap) Interface Cable IFC-400PCU* *Also available for purchase separately. Memory Card USB card reader Windows/Macintosh Canon-Brand PictBridge Compliant Printers HDMI Cable HTC-100 High-Definition TV... -
Page 39: Separately Sold Accessories
Separately Sold Accessories The following camera accessories are sold separately. Some accessories are not sold in some regions, or may no longer be available. Power Supplies Battery Charger CB-2LZ/CB-2LZE ● An adapter for charging Battery Pack NB-7L. Battery Pack NB-7L ●... -
Page 40: Other Accessories
Separately Sold Accessories Flash Speedlite 270EX/430EX II/580EX II ● A shoe-mounted flash that allows for a wide range of flash photography. Speedlite 430EX and 580EX may also be used. Speedlite Bracket SB-E2 ● Prevents unnatural shadows from appearing on the sides of objects when shooting from a vertical position, and is useful for shooting portraits. - Page 41 Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
-
Page 43: Learning More
Learning More This chapter explains the parts of the camera and what appears on the screen, as well as the basic operating instructions. -
Page 44: Components Guide
Components Guide Zoom Lever Microphone (p. 31) Shooting: i (Telephoto) / j (Wide h (Flash) Button (p. 72) Angle) (pp. 25, 30, Speaker Playback: k (Magnify) / g (Index) Lamp (pp. 61, 67, 68, 80, 81, 158, 159) (pp. 120, 125) Focal Length (approx.) Shutter Button... - Page 45 Components Guide Screen (LCD Monitor) (pp. 19, 46, 179, A/V OUT (Audio/Video Output) / 181) DIGITAL Terminal (pp. 35, 127, 144) (Short Cut) (p. 162) (AF Frame Selector) (pp. c (Direct Print) a (Single Image Erase) Button (p. 144) Button (p.
-
Page 46: Screen Display
Screen Display Switching the Display You can change the screen display using the l button. Refer to p. 179 for details on information that appears on the screen. Opening the screen with the power on will turn the screen on, and turn the viewfinder off. -
Page 47: Indicator
Indicator Screen Display in Dark Shooting Conditions The display automatically brightens when shooting in dark conditions, allowing you to check the composition (Night Display function). However, the brightness of the image on the screen, and the brightness of the actual image recorded may be different. -
Page 48: Func. Menu - Basic Operations
FUNC. Menu – Basic Operations You can set commonly used functions using the ø menu. The menu items and options differ depending on the Shooting mode (pp. 182 – 183). Choose a Shooting mode. ● Set the mode dial to the desired shooting mode. -
Page 49: Menu - Basic Operations
MENU – Basic Operations Various functions can be set from the menus. The menu items are organized under tabs, such as for shooting (4) and playback (1). The options differ depending on the Shooting mode and the Playback mode (pp. 184 –... -
Page 50: Changing The Sound Settings
Changing the Sound Settings You can silence or adjust the volume of camera sounds. Muting Sounds Display the menu. ● Press the n button. Choose [Mute]. Press the qr buttons to choose the 3 tab. ● Press the op buttons or turn the  dial ●... -
Page 51: Changing The Screen Brightness
Changing the Screen Brightness The screen brightness can be changed in two ways. You can set the brightness of the screen and the viewfinder separately. (Press the l button to switch to the desired display before making settings). Using the Menu Display the menu. -
Page 52: Adjusting The Viewfinder
Adjusting the Viewfinder You can adjust the viewfinder so that the display is clearly visible (Dioptric adjustment). Set the viewfinder display. ● Press the l button several times until the viewfinder turns on 46). Adjust the diopter. ● Adjust the dial while looking through the viewfinder. -
Page 53: Returning The Camera To Default Settings
Returning the Camera to Default Settings When you have mistakenly changed a setting, you can reset the camera to the default settings. Display the menu. Press the n button. ● Choose [Reset All]. Press the qr buttons to choose the 3 ●... -
Page 54: Low Level Memory Card Formatting
Low Level Memory Card Formatting Perform low level formatting when [Memory card error] appears, the camera does not operate properly, or you think that the recording/reading speed of a memory card has dropped. As you cannot retrieve the erased data, exercise adequate caution before formatting the memory card. -
Page 55: Clock Functions
Clock Functions Complete the low level format. ● Press the m button. • Low level formatting may take longer than standard formatting 23), since all recorded data is erased. • You can stop a low level format of a memory card by choosing [Stop]. When stopping low level formatting, the data will be erased but the memory card can be used without problem. -
Page 57: Shooting With Commonly Used Functions
Shooting with Commonly Used Functions This chapter explains how to shoot in different conditions, as well as how to use common functions, such as the self-timer. This chapter assumes the camera is set to A mode for “Zooming in • More Closely on Subjects (Digital Zoom)”... -
Page 58: Zooming In More Closely On Subjects (Digital Zoom)
Zooming in More Closely on Subjects (Digital Zoom) You can use the digital zoom to zoom up to approximately 140x and capture subjects that are too far away for the optical zoom to enlarge. The images may appear coarse, however, depending on the recording pixel setting (p. - Page 59 Zooming in More Closely on Subjects (Digital Zoom) Digital Tele-Converter The focal length of the lens can be increased by approx. 1.7x or approx. 2.1x. This enables a faster shutter speed and less chance of camera shake than the zoom (including digital zoom) used by itself at the same zoom factor. The images may appear coarse, however, depending on the combination of recording pixel (p.
-
Page 60: Inserting The Date And Time
Inserting the Date and Time You can insert the shooting date and time in the lower right corner of an image. Once inserted, however, they cannot be deleted. Be sure to check beforehand that the date and time are correctly set 20). -
Page 61: Using The Self-Timer
Using the Self-Timer The self-timer can be used to shoot a group photo that includes the photographer. The camera will shoot approximately 10 seconds after the shutter button is pressed. Press the p button. Choose Ò. ● Press the op buttons or turn the  dial to choose Ò, then press the m button. -
Page 62: Shooting In Various Conditions
Shooting in Various Conditions The camera will select the necessary settings for the conditions in which you wish to shoot when you choose the matching mode. Choose a Shooting mode. ● Set the mode dial to the desired Shooting mode. Shoot. -
Page 63: Shooting In Special Scenes
Shooting in Special Scenes The camera will select the necessary settings for the conditions in which you wish to shoot when you choose the matching mode. Enter K mode. Set the mode dial to K. ● Choose the Shooting mode. ●... - Page 64 Shooting in Special Scenes Take shots of people at the beach (Beach) ● Lets you take shots of brightly lit people on sandy beaches where the reflected sunlight is strong. Take shots of foliage (Foliage) ● Lets you shoot trees and leaves, such as new growth, autumn leaves or blossoms, in vivid colors.
-
Page 65: Adding Effects And Shooting
Shooting in Special Scenes Adding Effects and Shooting Shoot images with vivid colors (Super Vivid) ● Lets you take shots with vivid, intense colors. Take posterized shots (Poster Effect) ● Lets you take shots that look like an old poster or illustration. Since you may not achieve the expected results with images shot in , try taking some test shots first. -
Page 66: Detecting A Smile And Shooting
Detecting a Smile and Shooting The camera will shoot, even without pressing the shutter button, when it detects a smile. Choose ● Follow Steps 1 – 2 on p. 63 to choose then press the l button. Press the qr buttons or turn the  dial to ●... -
Page 67: Using The Wink Self-Timer
Using the Wink Self-Timer Point the camera at a person and press the shutter button fully. The camera will shoot approximately two seconds after it detects a wink. Choose ● Follow Steps 1 – 2 on p. 63 to choose then press the l button. -
Page 68: Using The Face Self-Timer
Using the Face Self-Timer • Shutting both eyes will also be detected as a wink. • If a wink is not detected, the shutter will release approximately 15 seconds later. • If there are no people in the shot when the shutter button is pressed fully, the camera will shoot after a person enters the shot and winks. -
Page 69: Shoot With The Effects Of A Fish-Eye Lens (Fish-Eye Effect)
Shoot with the Effects of a Fish-Eye Lens (Fish-eye Effect) Changing the number of shots in Step 1, press the op buttons. After choosing Even if your face is not detected after joining the subjects, the shutter will release approximately 15 seconds later. Shoot with the Effects of a Fish-Eye Lens (Fish-eye Effect) Lets you shoot with the distorting effect of a fish-eye lens. -
Page 70: Take Shots That Look Like A Miniature Model (Miniature Effect)
Take Shots That Look Like a Miniature Model (Miniature Effect) Blurs chosen portions in the top and bottom of an image to produce the effect of a miniature model. Choose ● Follow Steps 1 – 2 on p. 63 to choose A white frame (the area that will not be blurred) appears on the screen. -
Page 71: Choosing Settings Yourself
Choosing Settings Yourself In this chapter you will learn how to use the various functions in G mode to progressively advance your shooting skills. This chapter assumes that you have set the mode dial to G. • G stands for Program AE. •... -
Page 72: Shooting In Program Ae
Shooting in Program AE You can choose the settings for various functions to suit your preferences. AE stands for Auto Exposure. The focusing range is approximately 5 cm (2.0 in.) – infinity at maximum wide angle (j), and approximately 1.4 m (4.6 ft.) – infinity at maximum telephoto (i). -
Page 73: Adjusting The Brightness (Exposure Compensation)
Adjusting the Brightness (Exposure Compensation) You can adjust the standard exposure set by the camera in 1/3-stop increments in the range of -2 to +2. Enter Exposure Compensation mode. Press the o button. ● Adjust the brightness. While watching the screen, turn the  dial ●... -
Page 74: Changing The Recording Pixel Setting (Image Size)
Changing the Recording Pixel Setting (Image Size) You can choose from five recording pixel (image size) settings. Choose the recording pixel setting. ● After pressing the m button, press the op buttons to choose Choose an option. Press the qr buttons or turn the  dial to ●... - Page 75 (Widescreen) 3744x2104 3771 15443 • The values in the table are measured according to Canon standards and may change depending on the subject, memory card and camera settings. Approximate Values for Paper Size ● Suitable for sending images as e-mail attachments.
-
Page 76: Changing The Iso Speed
Changing the ISO Speed Choose the ISO speed. ● After pressing the m button, press the qr buttons or turn the  dial to choose an option, then press the m button. The setting will appear on the screen. Automatically adjusts the ISO speed to the Shooting mode and shooting conditions. -
Page 77: Adjusting The White Balance
Adjusting the White Balance The white balance (WB) function sets the optimal white balance for natural looking colors to match the shooting conditions. Choose the white balance function. After pressing the m button, press the ● op buttons to choose Choose an option. -
Page 78: Continuous Shooting
Continuous Shooting As long as you hold the shutter button down, the camera will shoot continuously. Choose a Drive mode. ● After pressing the m button, press the op buttons to choose Choose an option. ● Press the qr buttons or turn the  dial to choose W or , then press the m button. -
Page 79: Changing The Tone Of An Image (My Colors)
Changing the Tone of an Image (My Colors) You can change the tone of an image to sepia or black and white when shooting. Choose My Colors. After pressing the m button, press the ● op buttons to choose Choose an option. ●... -
Page 80: Using The Self-Timer To Prevent Camera Shake
Using the Self-Timer to Prevent Camera Shake Custom Color The contrast, sharpness, color saturation, red, green, blue, and skin tones in an image can be chosen and set at 5 different levels. ● Follow Step 2 on p. 79 to choose , then press the l button. -
Page 81: Customizing The Self-Timer
Customizing the Self-Timer You can set the time delay (0 – 30 seconds) and the number of shots (1 – 10 shots). Choose $. After pressing the p button, press the ● op buttons or turn the  dial to choose $, then press the n button immediately. -
Page 82: Shooting Using A Tv Monitor
Shooting Using a TV Monitor You can use a TV to display the camera screen content while shooting. • To connect the camera to a TV, follow the Steps in “Viewing Images on a TV” 127). • Shooting procedures are the same as when using the camera screen. TV display is not available when using HDMI Cable HTC-100 (sold separately) to connect the camera to a high-definition TV. -
Page 83: Getting More Out Of Your Camera
Getting More Out of Your Camera This chapter serves as the advanced version of Chapter 4 and explains how to take pictures using various functions. This chapter assumes that you have set the mode dial to G. • • The sections “Setting the Shutter Speed” 95), “Setting the Aperture Value”... -
Page 84: Changing The Af Frame Mode
Changing the AF Frame Mode You can change the AF (Auto Focus) frame mode to match the scene you want to shoot. Choose [AF Frame]. After pressing the n button, choose ● [AF Frame] in the 4 tab, then press the qr buttons to choose an option. -
Page 85: Changing The Af Frame Position And Size
Changing the AF Frame Position and Size When the AF frame mode is set to [FlexiZone] (p. 84) you can change the position and size of the AF frame. Press the button. The AF frame will turn orange. Move the AF frame. ●... -
Page 86: Magnifying The Focal Point
Magnifying the Focal Point If you press the shutter button halfway, the AF frame will magnify and you can check the focus. Choose [AF-Point Zoom]. ● Press the n button to choose [AF- Point Zoom] in the 4 tab, then press the qr buttons to choose [On]. -
Page 87: Shooting With The Af Lock
Shooting with the AF Lock Focus. ● The focus and exposure will be maintained where the blue AF frame appears while you press the shutter button halfway. • The camera may not be able to focus in some conditions. • In low light conditions, AF frames may not turn blue even after pressing the shutter button halfway. -
Page 88: Choosing The Person To Focus On (Face Select)
Choosing the Person to Focus On (Face Select) You can choose a specific person’s face to focus on and then shoot. Set the AF frame to [Face Detect] 84). Enter Face Select mode. ● Point the camera toward the face of the subject and press the button. -
Page 89: Shooting In Manual Focus Mode
Shooting in Manual Focus Mode You can use manual focus when auto focus is not possible. If you press the shutter button halfway after roughly focusing manually, you can fine tune the focus. Choose ● After pressing the q button, press the qr buttons or turn the Â... -
Page 90: Focus Bracketing (Focus-Bkt Mode)
Focus Bracketing (Focus-BKT Mode) The camera automatically takes three continuous shots in the following order: one at the position set in manual focus, and one each with focus positions preset farther and nearer. The focus adjustment can be set in 3 levels. Choose After pressing the m button, press the ●... -
Page 91: Reacquiring Zoomed In Subjects (Frame Assist)
Reacquiring Zoomed In Subjects (Frame Assist) If you lose track of your subject while zoomed in, zooming out will make it easier to find. Look for the subject. ● Press and hold the button. The camera will zoom out, and the area that appeared on the screen before pressing the button will appear as a... -
Page 92: Changing The Metering Method
Changing the Metering Method You can change the metering method (brightness measuring function) to match the shooting conditions. Choose the metering method. ● After pressing the m button, press the op buttons to choose Choose an option. ● Press the qr buttons or turn the  dial to choose an option, then press the m button. -
Page 93: Shooting With The Ae Lock
Shooting with the AE Lock You can lock the exposure and shoot, or set the focus and exposure separately to shoot. AE stands for “Auto Exposure”. Lock the exposure. ● Point the camera toward the subject and press the o button while pressing the shutter button halfway. -
Page 94: Auto Exposure Bracketing (Aeb Mode)
Auto Exposure Bracketing (AEB Mode) Compose the scene and shoot. Auto Exposure Bracketing (AEB Mode) The camera takes 3 continuous shots while automatically adjusting the exposure to standard exposure, underexposure and overexposure, in that order. Choose After pressing the m button, press the ●... -
Page 95: Setting The Shutter Speed
Setting the Shutter Speed You can set the shutter to the speed at which you want to shoot. The camera will set the appropriate aperture value for the shutter speed you set. M stands for “Time value”. Set the mode dial to Make the setting. -
Page 96: Setting The Aperture Value
Setting the Aperture Value You can set the aperture to a value at which you want to shoot. The camera will set the appropriate shutter speed for the aperture value you set. B stands for “Aperture value”, which refers to the size of the aperture opening inside the lens. -
Page 97: Setting The Shutter Speed And Aperture Value
Setting the Shutter Speed and Aperture Value You can manually set the shutter speed and aperture to shoot images. D stands for “Manual”. Set the mode dial to D. Make the setting. Press the o button to choose the shutter ●... -
Page 98: Correcting The Brightness And Shooting (I-Contrast)
Correcting the Brightness and Shooting (i-Contrast) The camera can detect areas in the scene, such as faces or backgrounds, that are too bright or dark and automatically adjust them to the optimum brightness when shooting. Also, when the overall image is lacking in contrast, the camera will automatically correct the image for a sharper impression when shooting. -
Page 99: Shooting With Slow Synchro
Shooting with Slow Synchro Red-eye correction may be applied to areas other than red eyes. For example, when red make-up has been used around eyes. • You can correct recorded images 142). If you hold down the h button for more than one second, the screen in •... -
Page 100: Adjusting The Flash Exposure Compensation
Adjusting the Flash Exposure Compensation Just like with Exposure Compensation 73), you can adjust the exposure ±2 stops in 1/3-stop increments when using the flash. Choose ~. ● After pressing the m button, press the op buttons to choose ~. Make the setting. -
Page 101: Checking For Shut Eyes
Checking for Shut Eyes Make the setting. ● Press the qr buttons or turn the  dial to choose the amount of flash output, then press the m button. Once set, ~ will appear on the screen. You can also set the flash output. Press the n button and choose •... -
Page 102: Registering Shooting Settings
Registering Shooting Settings You can register commonly used shooting modes and settings to your preference. To switch between registered settings, simply turn the mode dial . Even if you switch shooting modes or turn off the power, settings that usually cancel (self timer, etc.) will be saved. Settings that Can be Registered Shooting modes (G, M, B and D) •... -
Page 103: Changing The Color And Shooting
Changing the Color and Shooting You can change the look of an image when shooting. However, depending on shooting conditions the image may become coarse, or the colors may not come out as expected. Color Accent You can choose to retain a single color and change the rest to black and white in a composition. - Page 104 Changing the Color and Shooting Color Swap You can swap one color in an image for another when recording it. You can only swap one color. Choose Y. ● to choose Y. Follow Steps 1 – 2 on p. 63 Press the l button.
- Page 105 Changing the Color and Shooting Specify the range of colors to be swapped. ● Press the op buttons or turn the  dial to adjust the range of colors to be changed. ● Choose a negative value to limit the range of colors.
-
Page 106: Shooting Stitch Assist Images
Shooting Stitch Assist Images Large subjects can be split into several shots that can later be merged together using the included software on a computer to create a panoramic image. Choose x or v. ● Follow Steps 1 – 2 on p. -
Page 107: Using Various Functions For Shooting Movies
Using Various Functions for Shooting Movies This chapter serves as a more advanced version of the “Shooting Movies” and “Viewing Movies” sections in Chapter 1, and explains how to use various functions for shooting and viewing movies. This chapter assumes that the mode dial has been set to E mode. You •... -
Page 108: Shooting Movies In E Mode
Shooting Movies in E Mode Enter E mode. ● Set the mode switch to E. Adjust the settings according to your purposes (pp. 108 – 115). Shoot. ● Press the movie button. ● To stop shooting the movie, press the movie button again. -
Page 109: Shoot Movies That Look Like A Miniature Model (Miniature Effect)
Shoot Movies That Look Like a Miniature Model (Miniature Effect) You can shoot movies that look like moving miniature models. You create the miniature model effect by choosing the upper and lower portions of the scene that will be blurred and the playback speed, which makes people and objects in the scene move quickly during playback. - Page 110 Shoot Movies That Look Like a Miniature Model (Miniature Effect) Playback Speeds and Estimated Playback Times (for 1 Min. Clips) Speed Playback Time 12 sec. 6 sec. 3 sec. If you press the m button in Step 2, the horizontal/vertical orientation of •...
-
Page 111: Changing The Image Quality
1 hr. 58 min. 19 sec. 8 hrs. 4 min. 30 sec. • Based on Canon’s testing standards. • Recording will automatically stop when the clip file size reaches 4 GB, or when the recording time reaches 29 minutes and 59 seconds when shooting in... -
Page 112: Taking Still Images While Shooting A Movie
Taking Still Images while Shooting a Movie You can shoot still images while shooting a movie. Focus while shooting a movie. ● Make sure that 4 appears on the screen and press the shutter button halfway. The focus and exposure will readjust (the camera will not beep). -
Page 113: Ae Lock/Exposure Shift
AE Lock/Exposure Shift What if 4 changes and you can’t take a still image? You may not be able to take still images when the writing speed to the memory card is slow, or when there is insufficient internal memory. 4 (blinking): Processing recorded image. -
Page 114: Sound Settings
Sound Settings Adjusting the Recording Volume You can manually set the recording volume for shooting movies. Press the n button to choose [Movie ● Audio] from the 4 tab, then press the m button. ● Press the op buttons or turn the  dial to choose [Mic Level], then press the qr buttons to choose [Manual]. -
Page 115: Other Shooting Functions
Other Shooting Functions The following functions can be used in the same way as for still images. Functions marked with a * can be used in the same way as for still images , > or z. when in • Zooming in More Closely On Subjects are available in E. -
Page 116: Playback Functions
Playback Functions The following functions can be used in the same way as for still images. • Erasing Images (p. 29) • Quickly Searching Images (p. 120) • Viewing Images in Filtered Playback (p. 121) • Viewing Slideshows (p. 123) •... -
Page 117: Editing
Editing You can trim the beginnings and ends of recorded movies. Choose *. ● to choose *, Follow Steps 1 – 3 on p. 32 then press the m button. The movie editing panel and the movie editing bar will appear. Movie Editing Panel Set the editing range. -
Page 118: Save The Edited Movie
Editing ● To cancel editing, press the op buttons, . After pressing the m and choose button, press the qr buttons or turn the  dial to choose [OK], then press the m button again. Save the edited movie. Press the op buttons to choose ●... -
Page 119: Using Various Playback And Editing Functions
Using Various Playback and Editing Functions This chapter explains various ways to play back and edit images. Press the 1 button to enter Playback mode before operating the camera. • • It may not be possible to play back or edit images that have been edited on a computer, had their file name changed, or have been taken on a different camera. -
Page 120: Quickly Searching Images
Quickly Searching Images Searching Images Using Index Display Displaying multiple images at the same time lets you quickly find the image you want. Move the zoom lever toward g. Images will display in an index. ● The number of images increases each time you move the lever toward g. -
Page 121: Viewing Images In Filtered Playback
Viewing Images in Filtered Playback When there are many images on the memory card, you can filter and display them by a specified filter. You can also protect (p. 129) or delete (p. 132) images at once while filtered. Jump to Favorites Displays images tagged as favorites 134). - Page 122 Viewing Images in Filtered Playback What if you can’t choose a filter? Filters that do not have any corresponding images cannot be chosen. Filtered playback In filtered playback (Step 2), you can view filtered images with “Quickly Searching Images” 120), “Viewing Slideshows” 123), and “Magnifying Images”...
-
Page 123: Viewing Slideshows
Viewing Slideshows You can automatically play back images recorded to a memory card. Choose [Slideshow]. ● Press the n button to choose [Slideshow] from the 1 tab, then press the m button. Make the setting. ● Press the op buttons or turn the  dial to choose an item, then press the qr buttons to adjust the setting. -
Page 124: Checking The Focus
Checking the Focus You can magnify the area of a recorded image that was inside the AF Frame, or the area of a face that was detected, to check the focus. Press the l button to switch to the focus check display 47). -
Page 125: Magnifying Images
Magnifying Images Move the zoom lever toward k. ● The display will zoom in on the image. If you continue to hold the zoom lever, it will zoom in up to a maximum factor of 10x. ● If you press the opqr buttons, you can move the location of the displayed area. -
Page 126: Changing Image Transitions
Changing Image Transitions Choose an image. ● Press the opqr buttons to choose the image you want to view next. The chosen image will be displayed in the middle, and the next four possibilities will appear. ● Pressing the m button will display the middle image at full size. -
Page 127: Viewing Images On A Tv
Viewing Images on a TV Using the supplied stereo AV cable 2), you can connect the camera to a TV to view images you have shot. Turn off the camera and TV. Connect the camera to the TV. ● Open the camera’s terminal cover and fully insert the cable plug into the camera’s terminal. -
Page 128: Viewing Images On A High-Definition Tv
Viewing Images on a High-Definition TV Use the separately sold HDMI Cable HTC-100 to connect the camera to a high-definition TV for an enhanced viewing experience. Turn off the camera and TV. Connect the camera to the TV. ● Open the camera’s terminal cover and fully insert the cable plug into the camera’s terminal. -
Page 129: Protecting Images
Protecting Images You can protect important images so that they cannot be accidentally erased with the camera (pp. 29, 132). Choose a selection method Choose [Protect]. Press the n button to choose ● [Protect] in the 1 tab, then press the m button. - Page 130 Protecting Images Protect the image. ● If you press the n button, a confirmation screen will appear. ● Press the qr buttons or turn the  dial to choose [OK], then press the m button. If you switch shooting modes or turn off the power before performing the operations in Step 3, images will not be protected.
-
Page 131: Protect Images
Protecting Images ● Press the qr buttons or turn the  dial to choose an image, then press the m button. ● You cannot choose images before the first image. Protect images. ● Press the p button to choose [Protect], then press the m button. -
Page 132: Erasing Images
Erasing Images You can choose images and then erase them in groups. Since erased images cannot be recovered, exercise adequate caution before erasing. Protected images (p. 129) cannot be erased. Choose a selection method Choose [Erase]. ● Press the n button to choose [Erase] in the 1 tab, then press the m button. - Page 133 Erasing Images Erase. ● If you press the n button, a confirmation screen will appear. ● Press the qr buttons or turn the  dial to choose [OK], then press the m button. Select Range Choose [Select Range]. ● Follow Step 2 on p.
-
Page 134: Tagging Images As Favorites
Tagging Images as Favorites When you tag images as favorites, you can easily categorize just those images. You can also filter out just those images for viewing, protecting or erasing 121). Choose [Favorites]. Press the n button to choose ● [Favorites] in the 1 tab, then press the m button. -
Page 135: Organizing Images By Category (My Category)
Organizing Images by Category (My Category) You can organize images into categories. You can display the images in a category in Filtered Playback (p. 121) and process all images at once by using the functions below. • “Viewing Slideshows” 123), “Protecting Images” 129), “Erasing Images”... - Page 136 Organizing Images by Category (My Category) Choose an image. ● Press the qr buttons or turn the  dial to choose an image. Choose a category. ● Press the op buttons to choose a category, then press the m button. will appear on the screen.
-
Page 137: Rotating Images
Rotating Images Choose a category. ● Press the p button to choose an item, then press the qr buttons or turn the  dial to choose a category. Choose the setting. ● Press the p button to choose [Select], then press the m button. If you choose [Deselect] in Step 4, you can deselect all of the images in the [Select Range] category. -
Page 138: Resizing Images
Resizing Images You can resize images to a lower pixel setting and save the resized image as a separate file. Choose [Resize]. ● Press the n button to choose [Resize] in the 1 tab, then press the m button. Choose an image. Press the qr buttons or turn the Â... -
Page 139: Trimming
Trimming You can cut out a portion of a recorded image and save it as a new image file. Choose [Trimming]. ● Press the n button to choose [Trimming] in the 1 tab, then press the m button. Choose an image. ●... -
Page 140: Adding Effects With The My Colors Function
Adding Effects with the My Colors Function You can change the color of an image and save it as a separate image. Refer p. 79 for details on each menu item. Choose [My Colors]. ● Press the n button to choose [My Colors] in the 1 tab, then press the m button. -
Page 141: Correcting The Brightness (I-Contrast)
Correcting the Brightness (i-Contrast) The camera can detect areas in an image, such as faces or backgrounds, that are too dark and automatically adjust them to the optimum brightness. Also, when the overall image is lacking in contrast, the camera will automatically correct the image for a sharper impression. -
Page 142: Correcting The Red-Eye Effect
Correcting the Red-Eye Effect You can automatically correct red eyes in images and save them as new files. Choose [Red-Eye Correction]. ● Press the n button to choose [Red- Eye Correction] in the 1 tab, then press the m button. Choose an image. -
Page 143: Printing
Printing This chapter explains how to choose images for printing, and print using a Canon-brand PictBridge compliant printer (sold separately) 41). Please also refer to the Personal Printing Guide. Canon-Brand PictBridge Compliant Printers... -
Page 144: Printing Images
Printing Images You can easily print the pictures you take by connecting the camera to a PictBridge compliant printer (sold separately) using the supplied interface cable Turn off the camera and printer. Connect the camera to the printer. ● Open the cover and insert the small plug of the included interface cable (p. - Page 145 • Refer to the Personal Printing Guide for details on printing. • Refer to p. 41 for Canon-brand PictBridge compliant printers. • Index printing (p. 147) is not available on certain Canon-brand PictBridge compliant printers (sold separately).
-
Page 146: Printing From The Print List (Dpof)
Printing from the Print List (DPOF) You can add images to the print list (DPOF) directly after shooting or during playback by pressing the c button. These selection methods comply with the DPOF (Digital Print Order Format) standards. Choose an image. ●... -
Page 147: Choosing Images For Printing (Dpof)
Choosing Images for Printing (DPOF) You can choose up to 998 images on a memory card for printing and specify settings such as the number of copies so that they can be printed together (p. 150) or processed at a photo developer service. These selection methods comply with the DPOF (Digital Print Order Format) standards. -
Page 148: Choosing The Number Of Copies
Choosing Images for Printing (DPOF) • With [Index] chosen, the [Date] and [File No.] options cannot be set to [On] at the same time. • The date will be printed in the style set in the [Date/Time] function in the 3 tab 20). -
Page 149: Set All Images To Print Once
Choosing Images for Printing (DPOF) Select Range Choose [Select Range]. ● In Step 1 on 148, choose [Select Range], then press the m button. ● Follow Steps 2 and 3 on p. 130 to choose images. Make print settings. Press the op buttons to choose [Order], ●... -
Page 150: Print Added Images
Print Added Images All selections will be cleared. ● Press the qr buttons or turn the  dial to choose [OK], then press the m button. Print Added Images You can print images added to the print list by connecting the camera to a PictBridge compliant printer (pp. -
Page 151: Customizing Camera Settings
Customizing Camera Settings You can customize various settings to suit your shooting preferences. The first part of this chapter explains convenient and commonly used functions. The latter part explains how to change shooting and playback settings to suit your purposes. -
Page 152: Changing Camera Settings
Changing Camera Settings You can customize convenient and commonly used functions from the 3 tab 49). Changing Sounds You can change each of the camera’s operation sounds. ● Choose [Sound Options], then press the m button. ● Press the op buttons or turn the  dial to choose an option. - Page 153 Changing Camera Settings Changing the Start-up Screen You can change the start-up screen that appears when you turn on the camera. ● Choose [Start-up Image], then press the m button. ● Press the qr buttons or turn the  dial to choose an option.
- Page 154 Changing Camera Settings Register the start-up image or sounds with the included software The dedicated operation sounds and start-up images on the included software can be registered to the camera. Refer to the Software Guide for details. Changing the File Number Assignment Images you shoot are automatically assigned file numbers in the order they were taken, from 0001 –...
-
Page 155: Creating Folders By Shooting Date
Changing Camera Settings Creating Folders by Shooting Date Images are saved into folders created each month, however, you can also create folders by shooting date. ● Choose [Create Folder], then press the qr buttons to choose [Daily]. ● Images will be saved into folders created on each shooting date. -
Page 156: Setting The Screen Shut-Off Time
Changing Camera Settings Setting the Screen Shut-Off Time You can adjust the time the screen takes to shut off automatically 52). This also works when [Auto Power Down] is set to [Off]. ● Choose [Power Saving], then press the m button. - Page 157 Changing Camera Settings Set the world time zone. ● Press the op buttons or turn the  dial World], then press the m to choose [ button. ● Press the qr buttons or turn the  dial to choose the destination time zone. ●...
-
Page 158: Changing Shooting Function Settings
Changing Shooting Function Settings If you set the mode dial to G, you can change the settings in the 4 tab 49). Before attempting to shoot using a function explained in this chapter in modes other than G mode, check if the function is available in those modes (pp. -
Page 159: Changing The Flash Timing
Changing Shooting Function Settings Changing the Flash Timing You can change the timing of the flash and shutter. Choose [Flash Control], then press the m ● button. Press the op buttons or turn the  dial ● to choose [Shutter Sync.], then press the qr buttons to choose a setting. -
Page 160: Customizing Display Information
Changing Shooting Function Settings Changing the Way the Image Displays Right After Shooting You can change the way the image displays right after shooting. ● Choose [Review Info], then press the qr buttons to choose an option. Displays the image only. Displays detailed information Detailed 181). -
Page 161: Changing The Is-Mode Settings
Changing Shooting Function Settings Displays shooting information Shooting Info 179). A grid overlays the screen. Grid Lines Gray bars will appear on the top and bottom of the screen. 3:2 Guide This area will not print when printing on paper with a 3:2 aspect ratio. -
Page 162: Registering Functions To The
Changing Shooting Function Settings • If camera shake is too strong, attach the camera to a tripod. You should also set the IS Mode to [Off] when the camera is attached to a tripod. • When using [Panning], hold the camera horizontally to shoot. Image stabilization does not work when the camera is held vertically. -
Page 163: Registering Commonly Used Shooting Menus (My Menu)
Registering Commonly Used Shooting Menus (My Menu) You can register up to 5 items from commonly used shooting menus to the tab, letting you quickly access these items from a single screen. Choose [My Menu settings]. ● Choose [My Menu settings] in the tab, then press the m button. -
Page 164: Changing Playback Function Settings
Changing Playback Function Settings • Gray items in Step 2 can also be set, however, they may not be available depending on the Shooting mode. Choose [Set default view] and press the qr buttons to choose [Yes]. My • Menu can now be displayed by pressing the n button when in a Shooting mode. -
Page 165: Useful Information
Useful Information This chapter introduces how to use separately sold accessories 39), troubleshooting tips, and contains lists of functions and items that appear on the screen. -
Page 166: Using Household Power
Using Household Power If you use AC Adapter Kit ACK-DC50 (sold separately), you can use the camera without worrying about how much charge is left in the battery. Turn off the camera. Plug the cord into the coupler. ● Fully insert the plug into the coupler. Terminals Insert the coupler. -
Page 167: Using The Lens Hood (Sold Separately)
Using the Lens Hood (Sold Separately) Do not unplug the plug or power cord with the camera turned on. This could erase images you have taken or damage the camera. Using the Lens Hood (Sold Separately) When shooting a wide-angle photo that is backlit without using a flash, we recommend attaching Lens Hood LH-DC60 to reduce the amount of extraneous light entering the lens. -
Page 168: Using An Externally Mounted Flash (Sold Separately)
• Using a non-Canon brand flash (particularly a high-voltage flash) or flash accessories may inhibit normal operation or damage the camera. Attach the case for the hot shoe cap to the strap. - Page 169 Using an Externally Mounted Flash (Sold Separately) Turn the flash on, then turn the camera on. A red h appears on the screen (or the viewfinder). When the flash is charged, its pilot lamp will light. Display the flash settings screen. Press the n button to choose [Flash ●...
-
Page 170: Sold Separately
Using an Externally Mounted Flash (Sold Separately) Configuring the Externally Mounted Flash (Sold Separately) Speedlite 270EX, 430EX II, and 580EX II • The maximum flash synchro shutter speed is 1/250 second. • The flash output will automatically adjust when [Flash Mode] is set to [Auto]. - Page 171 Other Canon Flashes Canon flashes other than the Speedlite EX series will fire at their full strength. For the optimal aperture values and ISO speeds for the distance to the subject, refer to the guide number listed in the flash’s user guide.
-
Page 172: Using An Eye-Fi Card
Using an Eye-Fi Card Before using an Eye-Fi card, be sure to check whether Eye-Fi card use is authorized in the country or territory of use 16). When you put a prepared Eye-Fi card into the camera, you can automatically transfer your images wirelessly to a computer, or upload them to a web service. -
Page 173: Checking Connection Information
Using an Eye-Fi Card Checking Connection Information You can check the Eye-Fi card’s access point SSID, or connection status. Choose [Connection info]. Press the n button, then choose ● [Eye-Fi Settings] from the 3 tab, and press the m button. Press the op buttons or turn the Â... -
Page 174: Troubleshooting
Troubleshooting If you think there is a problem with the camera, first check the following. If the items below do not solve your problem, contact a Canon Customer Support Help Desk as listed on the included customer support list. Power You pressed the ON/OFF button, but nothing happened. - Page 175 Troubleshooting Image is blurred. • Press the shutter button halfway to focus on the subject, then press fully to shoot 24). • Shoot the subject within the focusing distance 189). • Set the [AF-assist Beam] to [On] 158). • Confirm that functions which you do not intend to use (macro, etc.) are not set. •...
- Page 176 Troubleshooting Recording images to the memory card takes a long time, or continuous shooting slows down. • Perform a low-level format of the memory card in the camera 54). Cannot make settings for shooting functions or ø menu. • The items in which settings can be made differ depending on the shooting mode. Refer to “Functions Available in Each Shooting Mode”...
-
Page 177: List Of Messages That Appear On The Screen
Memory card error (p. 54) • If the same message appears even when a formatted memory card is installed in the correct direction, contact a Canon Customer Support Help Desk 17). Insufficient space on card • There is not enough free space on the memory card to shoot (pp. - Page 178 If an error code appears directly after taking a picture, the shot may not have been recorded. Check the image in Playback mode. • If this error code reappears, note the Error number (Exx) and contact a Canon Customer Support Help Desk as there may be a problem with the camera.
-
Page 179: Information Displayed On The Screen
Information Displayed on the Screen Shooting (Information Display) The same information will display on the viewfinder. Battery Charge Indicator Digital Zoom Magnification AF Frame (p. 84) (p. 15) (p. 58) / Digital Tele- Estimated Display Area converter (p. 59) Camera Orientation* before Pressing the Focusing Range (pp. -
Page 180: Scene Icons
Information Displayed on the Screen : Standard, : Held vertically When shooting, the camera detects if it is held vertically or horizontally, and adjusts settings accordingly for the best shot. It also detects orientation during playback, so you can hold the camera in either orientation and it will automatically rotate images for correct viewing. - Page 181 Information Displayed on the Screen Playback (Detailed Information Display) Print List (pp. 146, 147) Eye-Fi Transfer Focusing Range Complete (p. 172) (pp. My Category (p. 135) Battery Charge Indicator File Size (pp. 111) Shooting mode (p. 182) (p. 15) Still Images: Recording ISO Speed 76), Metering Method...
-
Page 182: Functions Available In Each Shooting Mode
Functions Available in Each Shooting Mode Shooting modes D B M G Function — — — — Flash (pp. 26, 72, 99)* … — — — — — — — Zoom Framing Assist (p. 91) Change AF Frame Position and Size (p. - Page 183 Functions Available in Each Shooting Mode >z w O P t xv E — — — — — — — — — — — — — * — — — — — — — — — — — — — — —...
-
Page 184: Menus
Menus 4 Shooting Menu Shooting Modes D B M G Function FlexiZone — — — — — — AF Frame (p. 84) Center Face Detect Standard Digital Zoom (p. 58) Digital Tele-converter (1.7x/2.1x) AF-Point Zoom (p. 86) On/Off Servo AF (p. - Page 185 Menus >z w O P t xv E — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —...
-
Page 186: Set Up Menu
Menus 3 Set up Menu Item Content Ref. Page Mute On/Off* p. 50 Volume Set all operation sounds (5 levels). p. 50 Sound Options Set the sounds for each camera operation. p. 152 Hints & Tips On*/Off p. 152 LCD Brightness Set within a range of ±2. -
Page 187: Playback Menu
Menus 1 Playback Menu Item Content Ref. Page Smart Shuffle Starts Smart Shuffle. p. 125 Slideshow Plays back images automatically. p. 123 Erase Erases images (Select, Select Range, All p. 132 Images). Protect Protects images (Select, Select Range, All p. 129 Images). -
Page 188: Handling Precautions
• Use a commercially available blower brush to remove dust from the lens. For stubborn dirt contact a Canon Customer Support Help Desk as listed in your Warranty System Booklet. • When you move the camera rapidly from cold to hot temperatures, condensation may form on the internal or external surfaces of the camera. -
Page 189: Specifications
Specifications Image Sensor Camera Effective Pixels ..Approx. 14.1 million pixels Lens Focal Length....... 35x zoom: 4.3 (W) – 150.5 (T) mm (35mm film equivalent: 24 (W) – 840 (T) mm) Focusing Range ....0 cm (0 in.) – infinity (W), 1.4 m (4.6 ft.) – infinity (T) •... - Page 190 Specifications Shooting Mode ......C2, C1, M, Av, Tv, P, Auto, Portrait, Landscape, Sports, SCN* Movie* *1 Smart Shutter* , Low Light, Super Vivid, Poster Effect, Color Accent, Color Swap, Fish-eye Effect, Miniature Effect, Beach, Foliage, Snow, Fireworks, Stitch Assist *2 Smart Auto available *3 Standard, Miniature Effect, Color Accent, Color Swap *4 Smile, Wink Self-timer, Face Self-timer...
- Page 191 Largest Diameter x Length ..69.6 x 27.0 mm (2.74 x 1.06 in.) Weight ........Approx. 10 g (0.35 oz.) • All data is based on tests by Canon. • Camera specifications or appearance are subject to change without notice.
-
Page 192: Index
Index Date/Time Battery......Setting ..........AC Adapter Kit......... 39, World Clock ........Accessories ..........Default Settings ........AE Lock ........... 93, DIGITAL CAMERA Solution Disk ....AEB Mode ..........Digital Tele-Converter ......Focus Digital Zoom ..........AF Frames......26, 84, Display Language........ - Page 193 Index Focus Magnified Display ........AF Frame........26, Manual Focus (Focus Mode)....AF Lock..........Manual White Balance......AF-Point Zoom........Memory Cards .......... Face Select........Available Shots ......18, Servo AF..........Formatting........23, Focus Check........... Shooting Time......31, Focus Lock ..........Memory Cards Card Focusing Range ........
- Page 194 Index Troubleshooting........Tv (Shooting Mode)........SCN (Shooting Mode) ......Screen Display Language......Video Movies Information Display....179, Viewing Menu FUNC. Menu, Menu Filtered Playback ......Switching the Display ......Images on a TV ...... 127, SD/SDHC/SDXC Memory Card Memory Index Display ........Cards Magnified Display ......
- Page 195 • Reprinting, transmitting, or storing in a retrieval system any part of this guide without the permission of Canon is prohibited. • Canon reserves the right to change the contents of this guide at any time without prior notice. • Illustrations and screenshots in this guide may differ slightly from the actual equipment.