Table of Contents
Advertisement
APSNUG.book Page 71 Tuesday, May 4, 1999 11:13 AM
PnP/PCI Options
"
Parameter
Description
PCI IRQ Setting
Allows you to automatically or
manually configure the Plug-
and-Play (PnP) devices
installed in your system.
Refer to your device manual
for technical information
about the PCI card.
PCI Slot 1 / 2 /
Allow you to manually assign
3
an interrupt for each PCI
device installed in your
system. When the PCI IRQ
Settings is set to Auto, BIOS
automatically assigns the
available IRQs to the PCI
devices.
PCI IRQ Sharing
Allows you to assign the same
IRQ to two different devices.
71
Options
Auto or Manual
Yes or No
Advertisement
Table of Contents
