Advertisement
Quick Links
Universal Quick Install Guide
Quantum and Triton Boards
Use this guide to install Quantum boards and Triton class telephony boards,
including Triton VoIP, Triton Analog Extension, Triton Analog Trunk (LS and LS/
GS), Triton Resource, Triton T1/PRI, and Triton T1/E1 PRI, which are all different
boards with common installation procedures.
MVIP BUS Termination Switch
All Triton PCI Family and Quantum Boards
Note: CPU can be placed anywhere.
Supported Board/Software Guidelines
Board
Quantum
Triton Analog Extension
Triton Analog Trunk
Triton T1/PRI
Triton T1/E1 PRI
Triton VoIP-30
Triton VoIP-8
Triton Resource
MVIP Connector
Board Silhouette
OE 4.0
OE 4.0A
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
No
No
Yes
Yes
Yes
Yes
OE 4.0i
OE 4.5
OE/ACC/
ACM 4.6
No
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Power Cable
HPBX 4.6 OE/ACC/
ACM 5.0
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Advertisement
Related Manuals for Altigen Quantum Boards
Summary of Contents for Altigen Quantum Boards
- Page 1 Universal Quick Install Guide Quantum and Triton Boards Use this guide to install Quantum boards and Triton class telephony boards, including Triton VoIP, Triton Analog Extension, Triton Analog Trunk (LS and LS/ GS), Triton Resource, Triton T1/PRI, and Triton T1/E1 PRI, which are all different boards with common installation procedures.
-
Page 2: Installation Notes
Installation Notes • Observe proper board handling procedures (refer to AltiGen Field Alert #67). • Pre-installation of boards is recommended over on-site installations. • Although boards are factory tested prior to shipping, it is recommended that you follow a burn-in period of approximately 12 hours minimum before an on-site deployment. -
Page 3: Connection Options
Connection Options There are 3 connection options for connecting Quantum/Triton boards to trunks and extensions: 1. 12 Ports Bridging Adapter 2. 66 Punch Down Block with 50-Pin Telco Female Connector 3. Patch Panel with 50-Pin Telco Female Connector... -
Page 4: Installation Instructions
Triton Analog Extension (12 extensions): 0–F • Triton Analog Trunk: 0–F 7. Install the AltiGen System Key and ground the server before plugging in the power cord. 8. Boot the server and log on to Windows. 9. Go to Start>Settings>Control Panel>Administrative Tools>Services in Windows 2000 Server OR go to Start>Settings>Control Panel>Services in... - Page 5 Run the MVIP test again. If the MVIP test still fails, note the failing board and replace it. Repeat installation procedures starting from Step 1. Contact AltiGen to RMA the defective board. 14.If the board(s) have been properly installed, the newly installed boards will appear in the Boards View window in AltiWare Administrator.
-
Page 6: Technical Support
End users Contact your authorized AltiGen Dealer. Authorized AltiGen Dealers Call AltiGen Technical Support at 510-252-9712 x 410 Send e-mail to: support@altigen.com Please provide the following information so the support representative can provide fast service and a solution to your problem:...