Brother PE-Design Lite Manual page 16

b
Memo:
• If you want to edit the entered text, click
on the Tool Box, click the text to
select it, and then select the menu
command Text - Edit Letters. Edit the
text in the Edit Text Letters dialog box
that appeared. (For more details, refer to
"Editing entered text" on page 36.)
• If you want to delete the text, select it, and
then press the
• If you want to change the text color, font
or other attributes after entering the text,
click
to select it, and then change the settings
on the Sewing Attributes bar. (For more
details, refer to "Applying Sewing
Attributes to Text and Regions" on
page 39.)
3
Adjust the text size and position.
Click on the Tool Box.
→ The shape of the pointer changes to
.
Handles
12
key.
Delete
on the Tool Box, click the text
The status bar shows the
dimensions (width and height)
of the text.
Tutorial
Click the text
handle to adjust the selected text to the
desired size.
b
Memo:
• The shape of the pointer changes to
, , or
that the pointer is over.
• is for scaling the width.
• is for scaling the height.
• and
dimensions at the same time. (The
height-to-width proportion is maintained.)
• If the
handle is dragged, the text is enlarged or
reduced in both width and height from the
center of the text. (The height-to-width
proportion is maintained.)
• If the handles have disappeared, click the
text to show them again.
Move the pointer over the selected text. The
pointer changes to
desired position.
, and then drag a
, depending on the handle
are for scaling both
key is held down while a
. Drag the text to the
,