Running The Utilities From Diskette; Running The Utilities From The Compaq Smartstart And Support Software Cd - Compaq DL580 - ProLiant - 1 GB RAM Maintenance And Service Manual

3-6 Compaq ProLiant DL580 Server Maintenance and Service Guide

Running the Utilities from Diskette

I
Run the utilities from their individual diskettes. If you have a utility diskette newer than
the version on the SmartStart and Support Software CD, use that diskette.
I
Create a diskette version of the utility from the SmartStart and Support Software CD.
To create diskette versions of the utilities from the CD:
1. Start the Compaq SmartStart and Support Software CD.
2. From the Compaq System Utilities screen, select Create Support Software Disks, and then
select Next.
3. Select the diskette you would like to create from the list, and then follow the instructions
on the screen.
Running the Utilities from the Compaq SmartStart and Support
Software CD
IMPORTANT: Only the System Configuration Utility, the Array Configuration Utility, and the Array
Diagnostic Utility (ADU) can be executed from the SmartStart and Support Software CD. All other utilities
must be executed from either the system partition or from diskette.
To run these utilities directly from the SmartStart and Support Software CD:
1. Start the SmartStart and Support Software CD.
2. From the System Utilities screen, select the utility you wish to run, and then select Next.
G
To execute the System Configuration Utility, select Run System Configuration Utility.
G
To execute the Array Configuration Utility, select Run Array Configuration Utility.
G
To execute the Array Diagnostic Utility (ADU), select Run Array Diagnostic Utility.