Unpacking & Installation Instruction - Electrolux TINSEB471MRR0 Use & Care Manual

unpacking & Installation Instruction
uNPackINg aNd eXaMINg
your oveN
1. remove all packing materials from inside the
oven cavity. do not remove the waveguide
cover, which is located on the right cavity wall.
read and SAvE this Use and Care Guide.
2. remove the feature sticker, if there is one, from
the outside of the door.
Check the oven for any damage, such as
misaligned or bent door, damaged door seals
and sealing surfaces, broken or loose door
hinges and latches and dents inside the cavity
or on the door. If there is any damage, do not
operate the oven and contact your dealer or
ElECTrOlUx AUTHOrIZED SErvICEr.
choosINg a LocatIoN
For your oveN
you will use your oven frequently, so plan its
location for ease of use. The oven must be
placed on a countertop which is a minimum of
36 inches from the floor. Allow at least 2 inches
on the sides, top and at the rear of the oven for
air circulation.
your oven can be built into a cabinet or wall by
itself or above any electric wall oven or warming
drawer.
5