Before You Begin; Package Contents - 3Com Dual 56K User Manual

3

Package Contents

Before You Begin

B Y
EFORE OU
This chapter explains how to set up your Dual 56K LAN Modem, and guides you
through the basic pre-installation checks that you should perform on all
workstations that you will attach to the LAN Modem. This includes checking each
workstations' TCP/IP and IP address settings to determine whether it is set up for
dynamic or static IP networking. Instructions for setting up TCP/IP on your
workstation are provided for users who must perform this step.
Your Dual 56K LAN Modem package should contain all of the items shown:
OfficeConnect
Dual 56K LAN Modem
d e m
M o
L A N
6 k
a l 5
D u
n e ct
C o n
ic e
O ff
OfficeConnect Dual 56K LAN Modem
Companion Programs CD-ROM
Contains:
• User Guide (PDF and HTML)
• Getting Started Guide (PDF)
• Adobe Acrobat Reader
• Web Browsers
• EZ-LAN Wizard
• LAN Modem Desktop Manager
• Virtual FAX Modem/PhoneTools Fax Software
• Dial-Up Networking 1.3
In order to install and configure your Dual 56K LAN Modem, you should already
have the following:
One or two available Analog Telephone Connections, with available RJ-11
outlets
An Internet Service Provider (ISP) Account (unless you are only connecting
to a private network)
A Workstation that meets country-specific regulatory standards, with the
following requirements:
A 10BASE-T Ethernet card or Ethernet connectivity (Ethernet connectivity is
built in for Power Macintosh users)
TCP/IP software (built in with Windows 95, 98, NT, and 2000 and
Macintosh OS 7.6 or later)
CD-ROM drive
B
EGIN
OfficeConnect Dual 56K
LAN Modem Getting Started Guide
Two analog
Network Assistant CD
telephone cables
Contains helpful networking
(RJ-11 to RJ-11)
tutorials, troubleshooting
tips and product information
Power supply
transformer and
country-specific
power cord
Phone port adapter
One 10BASE-T
(not provided for
Ethernet cable
all locations)
(RJ-45 to RJ-45)
Rubber feet
and
stacking clip