LG N4B2N User Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Network Storage Server
  5. N4B2N
  6. User manual

LG N4B2N User Manual

Owner's manual
Hide thumbs Also See for N4B2N:
Table of Contents

Advertisement

Quick Links

User Guide and Instruction Manual
LG Network Storage
N4B2 / N4R2

Advertisement

Table of Contents
loading

Related Manuals for LG N4B2N

Summary of Contents for LG N4B2N

  • Page 1 User Guide and Instruction Manual LG Network Storage N4B2 / N4R2...

  • Page 2: Safety Warning

    Safety warning Note Do not place any objects within 15cm of the unit. The unit reaches high temperatures creating the risk of burn injuries. Only use compatible devices with the system ports, or the system and devices risk being damaged. Do not use damaged disks.
  • Page 3 Safety warning Related to damage to the HDD and data: - during installation or disconnection of the system, ensure that the system does not experience any external physical shocks. - During the operation of the HDD, short surges and stoppages of power may cause the system to turn off and on quickly.
  • Page 4 Safety warning Warning Do not use damaged electrical cords. This may cause electric shock, and is a fire hazard. Use a grounded cord and grounded socket to avoid electric shock and damage to components. Do not handle the electrical cord with wet hands, as this may cause shock and injury.
  • Page 5 Safety warning In the event of lighting and thunderstorms, immediately physically disconnect the system from any power source, to avoid damage to the system. In the event of dropping the system, contact the service centre for advice and possible service. Not doing this creates the risk of damage, fire and electric shock. Keep the system away from direct sunlight to avoid overheating, and melting of the case, which may eventuate in fire and injury.

  • Page 6: Table Of Contents

    Tray open / close (DISC OPEN button) .......... Action set up (MODE button) ............... IP Setup ........................... 37 Backup data on discs using LG NETWORK STORAGE (ODD Backup) ..38 Writing data to disc (ODD Burn) ................39 USB device / memory card back up ................41...
  • Page 7 RAID configuration state confirmation (RAID SYNC STATE) ......44 System operating status check .................44 [System Firmware Version Information] ................45 [FAN RPM Information] ......................45 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ............46 System Settings .................. Network ..........................46 Host ..............................47...
  • Page 8 User ............................ 71 Group ..........................75 Folder ..........................77 Trahsbox ............................80 Blu-ray / DVD ..................1 Storing – Saving Disc Data to the LG NETWORK STORAGE ......81 Disc Data Copy ..........................82 Disc Image Backup ........................83 Burning ..........................84 Burn Disc ............................. 85 Burn Image...........................
  • Page 9 x Contents x Service ....................10 Network Server ......................103 FTP ..............................103 AFP ............................... 105 Remote Access ......................105 DDNS (Dynamic DNS) ......................105 UPnP ............................106 Network Printer ......................107 iTunes ..........................116 Time Machine .........................117 [Web Set-up] ..........................117 [Mac OS] ............................118 iSCSI ..........................
  • Page 10 My Information ......................151 5. LG Network Storage web menu usage (Regular users) 152 Blu-ray / DVD ..................1 Storing – Saving Disc Data to the LG NETWORK STORAGE ......152 Disc Data Copy ...........................153 Disc Image Backup ........................154 Burning ........................... 155 Burn Disc ............................156...
  • Page 11 Contents x 7. LG Network Storage Maintenance ......... 181 LG Network Storage shut down/restart ..........11 Administrator password and network set up initialization ....1 System information checking and saving .......... 1 Self-diagnosis execution ..............1 System failure or malfunction ............. 1 Power cut or failure ................

  • Page 12: Introduction

    LG Network Storage Introduction Thank you for purchasing the LG Network Storage with Built-in Blu-ray/DVD Rewriter. Now the LG Network Storage basic data-save and share functions can be used in Windows, Mac and Linux operating systems. Similarly, the internal Blu-ray / DVD rewriter can be used to efficiently save data securely for long periods.

  • Page 13: Supported Os

    1. Introduction The LG Network Storage also allows for mobile synchronization, without the use of a PC, as mobile devices can be directly synchronized to the LG Network Storage. This user manual contains express installation information as well as detailed options and functions.

  • Page 14: Package Contents

    1. Introduction Package Contents • LG NETWORK STORAGE with built-in Blu- • LG NETWORK STORAGE Installer‘ (LG Ray Rewriter NETWORK STORAGE -system file installation disc) • ‘LG NETWORK STORAGE PC Software • Product warranty Installer‘ • Power cord • Quick install guide...

  • Page 15: Name Of Each Part

    1. Introduction Name of Each Part <Front> Power button: power on, off (to turn off power, push ab c de button twice) Disc Open button: : opens and closes optical disc drive tray. LCD window: displays current state Mode button: changes mode SET button: selects mode Blu-Ray/DVD Drive Memory card reader: supports SD, MMC, MS and XD...

  • Page 16: Lg Network Storage Installation

    STORAGE is internal, go to NETWORK STORAGE connection>. Hard disk installation and set up The LG NETWORK STORAGE hard disk rack is shown below. Refer to each part while installing the HDDs. Components of Hard Disk Rack Safety Lever Hard Disk Rack...
  • Page 17 2. LG Network Storage Installation First, ensure that the power is off for all components and the main system front cover. Open the LG NETWORK STORAGE front door. Unlock the hard disk rack and pull the lever to draw out the rack.
  • Page 18 2. LG Network Storage Installation Insert the hard disk into the hard disk rack, and with a screw driver, screw the four screws into place. Match the hard disk rack label number and the NAS front panel number, to insert the...
  • Page 19 2. LG Network Storage Installation Keeping the locker lever out, push the hard disk rack into place, listening, for the sound. When the hard disk rack is properly and com secure completely pushed in, press the button to lock it.

  • Page 20: Lg Network Storage Installer' Installation (Lg Network Storage System File Installation,Volume And Raid Configuration)

    Plug the “power cord” into an electrical outlet. While holding the ‘SET’ button, press the ‘POWER’ button to start the LG NETWORK STORAGE. After approximately 20 seconds the “Insert Boot CD“Message will appear and the tray...
  • Page 21 2. LG Network Storage Installation Insert the “LG NETWORK STORAGE Installer” disc and push the “DISC OPEN” button to close the tray. The messages “Checking LG Network Storage ” and ” Loading kernel ” indicate that the NAS is preparing to organize system files.
  • Page 22 2. LG Network Storage Installation When the message below appears, press ‘SET’ button and choose ‘S:YES(Setting to Basic Mode). Another message about default setup will appear. Press ‘SET’ button and choose ‘S: YES(Setting to Basic Mode). Setting system files1) will now begin along with the message below.
  • Page 23 Upon completion of booting, the message below will notify that the system is now booted, with the alarming sound. LG Network Storage will automatically configure RAID of the volume. * At RAID configuration, the hard drive number and size will determine the RAID configuration time.

  • Page 24: Lg Network Storage Connection

    In an environment with a DHCP server, selecting automatic IP search after connecting the LG Network Storage to the IP router/switch/hub will acquire the network information from the DHCP server. For a particular IP address allocated from the Network IP administrator, installation using an IP address, subnet mask, default gateway and allocated DNS information is simple.
  • Page 25 Desktop PC LG Network Storage * If the LG Network Storage is directly connected to the PC through a LAN cable, the PC’s local internet will not be accessed In this case, PC Internet may be disconnected. After checking that the LG Network Storage power cable has been connected, press...
  • Page 26 Photo DVD Album The Photo DVD Album program is a search program of all media files stored within the user’s PC or the LG Network Storage. It also provides functions to burn media or play movies Available programs for installation may vary depending on user’s OS environment...

  • Page 27: Lg Network Storage Pc S/W Installer' Installation (Pc Application Program Installation And Usage)

    2. LG Network Storage Installation PC application program installation Insert the “LG Network Storage PC Software Installer” CD in the PC’s optical drive (CD/DVD/BD drives). After a short while, the following menu will appear. * Installation on PCs without a fi ber optic drive may be processed using the iSCSI function of LG Network Storage.

  • Page 28: Pc Application Program Usage

    When the searching is completed, the LG Network Storage IP Address, MAC Address, and Host Name information are displayed on the screen. The factory default settings are shown below. - MAC Address: serial number for each LG Network Storage product is printed in the back label. - Host Name : LG-NAS...
  • Page 29 2. LG Network Storage Installation * If the desired LG Network Storage is not found, click again on the ‘Search Network’ button to restart the search. If the search on the ‘NAS Detector’ is unsuccessful, re-check <IP Setup>. the Network connection. For manual setup see section...
  • Page 30 * If no IP address is allocated, use the IP address “NAS Detector” or check the DHCP option and automatically assign an IP address If the ‘Open Web Menu’ button is clicked, the web menu of the selected LG Network Storage can be accessed.
  • Page 31 2. LG Network Storage Installation If the ‘Open Network Folder’ button is clicked, the LG Network Storage network folder can be accessed. In selecting “Open Web Menu” or “Open Network Folder”, a pop up appears with “Yes”, which when selected will produce a shortcut icon on the desk top, and after which the LG Network Storage web menu and network folder can be easily accessed.
  • Page 32 Blu-ray/DVD drives and synchronized storage of mobile devices. Double click on the LG Network Storage web menu shortcut button. The LG Network Storage web menu can be used, after inputting user ID and password. The LG Network Storage default ID and password are ‘admin’ and ‘admin’ .
  • Page 33 2. LG Network Storage Installation After logging in, use the LG Network Storage data set-up, share management, service management, Blu-ray/DVD drive, and mobile sync. features. The detailed information <Chapter Using LG Network Storage Web menu>. can be found in...
  • Page 34 * If the contents of the LG Network Storage ‘cdrom’ folder are not displayed correctly, please push the refresh button. * The default ID and password for the LG Network Storage are ‘admin’ and ‘admin’ . * Folders ‘volume’ / ‘service’ will only appear after the user has completely confi gured...

  • Page 35: Lcd Panel And Front Button Usage

    Power Off / On (POWER button) Power On After pushing the POWER button on the front panel the following message appears, activating the LG NETWORK STORAGE. Power Off When you press the power button on the front twice, the message below will appear and...

  • Page 36: Tray Open / Close (Disc Open Button)

    Similarly the tray can be pushed in by hand. Action set up (MODE button) By pressing the “MODE” button at the front of the LG NETWORK STORAGE, many functions become available for use. Use the “MODE” button as follows.

  • Page 37: Ip Setup

    “Use DHCP?”, the IP address and network settings will be automatically set It is recommended that the IP address of the LG NETWORK STORAGE is set up manually to avoid future clashes with other IP address connected to the same network. Using the DHCP set up, the last IP address digit will be either a D (Dynamic), for automatic set up, or an S (Static), for manual set up.

  • Page 38: Backup Data On Discs Using Lg Network Storage (Odd Backup)

    3. LCD panel and front button usage Backup data on discs using LG NETWORK STORAGE (ODD Backup) The data saved on the disc can be backed up to the LG NETWORK STORAGE by simple button operation. Insert the backup disc in the LG NETWORK STORAGE Blu-ray disc drive.

  • Page 39: Writing Data To Disc (Odd Burn)

    Insert a blank disc into the LG NETWORK STORAGE Blu-ray/DVD drive. On the first LG NETWORK STORAGE display push the MODE button to indicate the ODD burn mode. Immediately after the ISO image file selection, press the SET button.
  • Page 40 3. LCD panel and front button usage The required file can be found by using the MODE button and then using the SET button to begin the image file writing process. The percentage completed will be displayed on the LCD. During the writing process, pressing the MODE button will cancel the operation.

  • Page 41: Usb Device / Memory Card Back Up

    3. LCD panel and front button usage USB device / memory card back up The LG NETWORK STORAGE allows for a simple procedure and use of buttons to back up the USB device and memory card data. Note: An adaptor is needed for any memory card. (Refer to the website http:// www.lge.

  • Page 42: Lg Network Storage State Indication (Set Button)

    Pressing the SET button to the right and at the front of the panel, with pauses in between, the LG NETWORK STORAGE state and information can be seen on the first screen display. Pressingthe set button in this way will give the following information: [Host Name, IP] –...

  • Page 43: Time And Date Confirmation

    3. LCD panel and front button usage Time and date confirmation The LG NETWORK STORAGE current time / date settings can be confirmed. Save capacity confirmation Current storage capacity percentage is indicated as shown below. * For no configured volume, ‘---%’ will be displayed.

  • Page 44: Raid Configuration State Confirmation (Raid Sync State)

    RAID configuration in process System operating status check Correct operation of the LG NETWORK STORAGE can be confirmed. If the LG NETWORK STORAGE detects abnormality, ‘[SVC_CODE: xx_xx]’ will be displayed. For detailed information regarding the service code, refer to the web site, http://www.lge.com.

  • Page 45: [System Firmware Version Information]

    3. LCD panel and front button usage [System Firmware Version Information] This shows the version of the system firmware installed. [FAN RPM Information] This allows to check the current Fan rotation per minute of LG Network Storage.

  • Page 46: Lg Network Storage Web Menu Use (For Lg Network Storage Administrators)

    Very importantly, In the Network setting menu, an important set-up needs to be made to connect the LG Network Storage to the network. If the set up is not performed correctly, connection problems will arise at later stages, hence care must be taken.

  • Page 47: Host

    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Host Designate an LG Network Storage host name. A host name should be a minimum of 3 letters and a maximum of 12 letters, with a mixture of alphabets(A-Z or a-z), numbers(0-9) and a hyphen(-), but numbers and hyphen cannot be the first letter of the name.
  • Page 48 IP address should be confirmed through the LCD screen or the LG Network Storage Detector program. DHCP set-up will regularly renew the user’s IP address from the DHCP server, causing unintended IP address changes, and require close attention.
  • Page 49 * Ethernet Frame Size: If the Ethernet frame size is at least 1500 gigabits, specified files can be sent quickly and with ease. In this case, the LG Network Storage alone does not change, but so do the PC and home router/router/hub/switch frame sizes. Otherwise...

  • Page 50: Workgroup/Domain

    Set up a workgroup and domains that the Windows network supports. This will allow for access to the LG Network Storage shared folder in Windows. In addition to this, the LG Network Storage domain service supports a Windows Active Directory, enabling the import of existing user information, with ease and speed.

  • Page 51: Date & Time

    To manually set the date and time, click on the ‘Edit’ button. Use ‘standard time zone’ to designate the current local region for LG Network Storage. The standard time zone set-up may affect the NTP and domain user certification, so exact values must be entered.

  • Page 52: Ntp Set-Up

    NTP. To use the Default Time Server, refer to pool.ntp.org server time. Mail Notification To use Mail Notification, the LG Network Storage usage amount can be periodically checked. Registration information and results will be sent to users subsequent to their new registration.
  • Page 53 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) To use it check ‘Disable’ if ‘Enable’ is not used. If ‘Enable’ is checked, proceed with the following steps: SMTP Server Address: Input the Mail Server address. Refer to the information page in the network administrator Mail Service, and input the accurate SMTP Server Address value.

  • Page 54: Volume

    This section describes information and functions of volume where the user stores data. * The LG NETWORK STORAGE uses hard disks separated in 3 areas; System, Swap and User. - The System is where the LG NETWORK STORAGE firmware is installed with 10GB of space allocated.

  • Page 55: Volume Array Configuration

    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Volume Array Configuration This page displays information pertaining to existing state and size of the volume of the LG NETWORK STORAGE. Configuration is possible through the volume name, configuration disk, RAID level, volume state and capacity.
  • Page 56 Note: Total storage represents total available storage, which is defined by file system and RAID level. The ext3 file system of the LG NETWORK STORAGE occupies 1.5% of the total HDD storage, thus the actual available storage in a volume is approximately 98.5% of the total user storage.

  • Page 57: Volume Create

    RAID level, and is also dependant on the number of selected HDDs. The LG NETWORK STORAGE supports JBOD, RAID0, )RAID1, RAID5, RAID10, and single disk. Select the optimum RAID level according to user’s request. For a detailed explanation of <Appendix...

  • Page 58: Volume Migration

    Hard Disk Information This page shows the state and size of the hard disk in LG NETWORK STORAGE. The name of the disk, manufacturer, name of the model, current state of the disk, and capacity will be shown.

  • Page 59: Smart Information Of A Hard Disk

    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Status The state and operation of the hard disk are shown. The state of the hard disk is classified as active / free / formatting / syncing / scanning / spare.

  • Page 60: Power

    Standby Mode Standby Mode puts all hard disks installed in LG Network Storage in the Standby Mode when there is no data transfer in LG Network Storage for a certain period of time, in order to minimize power consumption. When reading or writing data in LG Network Storage in the Standby Mode, the hard disk in LG Network Storage will activate and be ready to use after 3 to 15 seconds.

  • Page 61: Wake On Lan

    ‘Enable’ , proceed to the next step. Set wait time. If there is no data traffic during the given time, the LG NETWORK STORAGE will enter hibernation mode. Time can be set to 30/60/120 minutes. Click on the ‘Apply’ button to dictate changes to the LG NETWORK STORAGE. Click on the ‘Cancel’...

  • Page 62: Ups Power Setting

    * If another device is connected to UPS, Please do not turn off UPS but keep the power Click on the ‘Apply’ button to enter changes to the LG NETWORK STORAGE. Click on the ‘Cancel’ button to discard changes.

  • Page 63: Shutdown

    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Shutdown Do not go directly to the LG NETWORK STORAGE, as the LG NETWORK STORAGE can be started and stopped via the web. • Restart - Ends all current operations and restarts the LG NETWORK STORAGE.

  • Page 64: Language Setting

    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Language Setting The web menu indicates a language selection capability. Click on the ‘Edit’ button to set language. Select a desired language and click on the ‘Apply’ button.

  • Page 65: Firmware

    LG Network Storage firmware settings can be changed (Upgrade, Initialization, Configuration and Backup/Restore). Upgrade LG Network Storage system and Blu-ray/DVD Driver firmware can be downloaded from the product web site, and can be used for upgrading. Systems with a fire wall do not allow upgrades to be installed...
  • Page 66 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [System Firmware Upgrade] Verify connection to the Internet and download system firmware for the LG Network Storage from the product site linked below. B http://www.lge.com Press the “find” button to select the system firmware downloaded from the product site.

  • Page 67: Initialization

    When upgrade is finished, the version of installed Blu-ray/DVD drive firmware will be indicated * For stability of data, a backup of the LG Network Storage is strongly recommended before upgrading. Installation takes between 1 to several minutes. Advance access of other client users to the LG Network Storage while upgrading firmware is forbidden.

  • Page 68: Configuration Back-Up

    * Initialization takes about 30 seconds to 2 minutes. Configuration Back-up This allows the back-up/recovery of settings for LG Network Storage at a certain time. Network settings (host name, IP address, workgroup), time setting (date/time, NTP), mail notification service setting, share administration (user, group, folder security), service setting values may be backed up but user data requires separate back-up.
  • Page 69 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [Save Settings to PC and Restore] During initialization of LG Network Storage, configuration files can be saved to PC for later restoration. [Save Configuration Files to PC ] Choose configuration files to be saved to PC and click on the ‘Save’...

  • Page 70: Lcd Control

    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) LCD Control Modify text on the LCD screen or LCD screen’s brightness on the LCD control menu. [LCD control] It is possible to activate or de-activate the LCD control function.

  • Page 71: Lg Network Storage Share Management

    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Idle state LCD screen becomes ‘idle state’ when the function button at the front part of the NAS is not used for 30 Seconds. Applicable set-up value manifests the brightness of the LCD screen when it is at the ‘idle state’...
  • Page 72 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [Create User] Click on the ‘Create User’ button. Enter user ID. User ID cannot be overlapped. Enter user password. Enter user password again for confirmation. Enter user’s name.
  • Page 73 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Batch registration Click on the ‘add user’ button. Click on the ‘bulk registration’ tab at the upper part. When the password in the CSV file is empty, select the ‘basic password set-up method’...
  • Page 74 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Click on the check box to select the user who wants to register while on the ‘CSV file user list’ - When inappropriate format is used, or when restricted name and ID are used, it is not possible to select since de-activated.

  • Page 75: Group

    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [Edit User] Entering editing mode by clicking on the user name in the registered user list, with the exception of the ID, all user information can be altered.
  • Page 76 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [Creating a New Group] Click on the ‘Create New Group’ button. Enter group name. Enter group description. Select user to be added to the group by clicking on the corresponding checkbox.

  • Page 77: Folder

    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [Editing Groups] By clicking on the ‘Group Name’ link in the registered group list, group attributes can be altered. Folder Current registered folders are displayed. A folder can be created/changed/deleted for file...
  • Page 78 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [Create New Folder] Click on the ‘Add Folder’ button. Enter the shared folder name. Enter folder description. Set the volume where the folder will be created if there is more than one.
  • Page 79 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Set folder access restriction. If ‘Disable’ is checked, users can access/use without restriction. Assign user/group to use the folder. Unassigned uses do not have access to the folder.

  • Page 80: Trahsbox

    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Trahsbox Removing a file or folder when the network drive is still connected creates a trashbox and all deleted files are temporarily moved here. If user were to recover the deleted data, user may find the file or folder from the trashbox and move them to the intended location.

  • Page 81: Blu-Ray / Dvd

    Network Storage administrators) Blu-ray / DVD The built in Blu-ray / DVD Drive allows direct copy of data from discs to LG NETWORK STORAGE. Furthermore, secondary backup of data using the Blu-ray / DVD drive makes data management safer and more efficient.

  • Page 82: Disc Data Copy

    Network Storage administrators) Disc Data Copy Storage of disc data using the LG NETWORK STORAGE is a data disc copy function. Insert the data disc in to the Blu-ray / DVD Drive and press the ‘Next’ button. If the disc is completely recognized, it will appear as ‘Data Disc’...

  • Page 83: Disc Image Backup

    Network Storage administrators) Disc Image Backup The disc information from the Blu-ray / DVD Drive is stored on the LG NETWORK STORAGE as an image file (*.iso, *.cue, *.bin). For Data Discs, files with extension iso are created, and for Audio and Video CDs, files with extensions cue and bin respectively are created. For copy-protected discs, image saving is not possible.

  • Page 84: Burning

    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Burning Burning the LG NETWORK STORAGE data to disc is possible using the Blu-ray / DVD Drive.

  • Page 85: Burn Disc

    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Burn Disc Burning LG NETWORK STORAGE files to disc is possible. [Button functions] : Moves to upper folder. : Refreshes the current folder. : Files or folders selected on the left window are sent to the right window to organize a list for recording.
  • Page 86 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Move the intended folder or file to the destined location. Selecting a folder or file to record and move to the right side produces a configuration data list...
  • Page 87 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Specify disc name in the ‘‘Disc Name’ window Click on the ‘Refresh’ button and confirm that disc writing is possible as indicated in the disc status box. Put a check in ‘Verify after completing burning’ if you wish to run a test on the written file after writing in a disc.

  • Page 88: Burn Image

    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Burn Image The image file of the disc used to save LG NETWORK STORAGE data can be burnt to disc. Go to the folder where the intended is located Selecting an image file to record Click on the ‘Refresh’...

  • Page 89: Schedule Backup & Restoration

    Network Storage administrators) Schedule Backup & Restoration This function allows you to back up and restore the data stored in LG Network Storage, using Blueray/DVD drive. A folder needs to be selected to schedule backup. The user can also select a folder and a file before start of the backup.
  • Page 90 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) <Create a Backup Schedule> The image file of the disc used to save LG NETWORK STORAGE data can be burnt to disc. Click ‘Create’ button to create a backup schedule. Fill in the schedule as below.
  • Page 91 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Backup is done by file, and it is possible to select ‘Incremental Backup and ‘Full Backup’ . When backup is done, a new folder named ‘YearDateHourSecond’ , based on the date of backup will be created, and the folders and filers within that folder will be backed up.In case you select ‘Incremental Backup’...
  • Page 92 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) <Start Scheduled Backup> You can use two discs or more to back up the folder or file whose size exceeds that of single disc. In such a case, it is possible to use different kinds of discs for backup(i.e. DVD and DVD disc or DVD and BD disc can be used) Make sure to check below as backup cannot be done in the cases below.
  • Page 93 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Check the backup folder and database. Check the data of the folder to be backed up and the information of the backup database. After checking is complete, ‘Select Backup File’ screen will pop up. You can back up the file selected from the folder to back up on the screen below, using the ‘Backup’...
  • Page 94 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) <Replace a Backup Disc> If there is not enough free space in the disc from frequent scheduled backups, you can replace the disc and proceed. If the size of the data to be backed up exceeds the free space of the disc, the data as much as the free space will be backed up.
  • Page 95 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Clicking ‘Reload’ button can lead to two situations below. [Incremental Backup] Files except ones that have been previously backed up will be loaded. [Full Backup] All files including ones that have been previously backed up will be loaded.

  • Page 96: Restore

    Select the backup schedule you wish to delete from the backup schedule list, and click ‘Delete’ button. Restore Restore a certain file or a folder from the disc that has been backed up to LG Network Storage. Restoration is done in the fixed folder(/LG Network Storage/Share/Restore), and a name of the folder will be the date and time of restoration, for example, ‘100217_173754’...
  • Page 97 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [To Restore a File] ‘Select a file to restore from the right screen on ‘Restore’ menu. Click ‘Restore’ . 1. If there are many versions of one file with different backup dates, it is possible to select the newest file and all files, and cancel the selection.
  • Page 98 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Put a check on the ‘Restore from Disc’s Database’ check box on the ‘Restore’ menu to load the backup schedule database from the disc. Click ‘Confirm’ button when a warning that ask for an agreement pops up.
  • Page 99 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) backed up. When all data are restored, the screen below will pop up to inform the completion of restoration. <Initialize Backup Schedule> To start backup schedule, initialize backup status by clicking ‘Initialization’ button on ‘Restore’...
  • Page 100 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) disc in the drive will be initialized. <Manage Restoration History> You check and manage history of backup and initialization on ‘Backup History’ menu. ‘Backup History’ menu shows backup history, backup information and backup file information.

  • Page 101: Backup History

    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Backup history You can see Backup and Initialization history. <Backup Information> You can see information on backup and initialization history from ‘Backup History’ tab. Backup information shows the start and end of backup, and size of files backed up, and...
  • Page 102 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) In addition, you can see more details by searching for time information on ‘Backup History’ from ‘Information – Log – Blu-Ray/DVD log’ .

  • Page 103: Service

    21. To use the default value (21), user may log on without inputting the port number. * Using the DDNS service offered by LG Network Storage will log on to ftp:// myname. lgnas.com:port number. For more details, please refer to system remote control <DDNS>.
  • Page 104 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Input the user name and password and login Look at the sharing folder. Folders and files can be managed via drag and drop, allowing for name change and delete. Depending on the local network environment, use of the firewall in the FTP server may be prohibited.

  • Page 105: Afp

    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) * LG Network Storage supports FTPS with advanced security on the existing FTP for better protection of the user’s data traveling through the internet. To use FTPS, an FTP connection program that supports FTPS must be used.

  • Page 106: Upnp

    The UPnP port forwarding is used for LG Network Storage to directly receive requests from the router connected to the LG Network Storage. Access to the LG Network Storage from the outside using a DDNS usually requires a special set-up for the router to forward network requests received by the router to the LG Network Storage, and the UPnP port forwarding function allows the router to forward data without a separate router set-up.

  • Page 107: Network Printer

    Check “Enable”, click the “Apply” button. [Windows users] In the web menu go to “Enable” to connect the network printer, after which an LG Network Storage printer icon appears. Doubling clicking on the icon shows the progress of the printer driver installation. For installation issues refer to the printer manual.
  • Page 108 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [Mac users] 1) OS X 10.4 Tiger Click on Go/ Utilities in the tool menu. Click on the Printer Setup Utility.
  • Page 109 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Click on Add. Hold the alt key down while clicking on More Printers.
  • Page 110 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) In the pop up window: i. Select Advanced. ii. Select Windows Printer via SAMBA.
  • Page 111 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) iii. Input the printer URI. The form name is smb: /LG Network Storage IP/printer. The printer name can be found in the Device Configuration(device config)/ USB Printer page.
  • Page 112 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) 2) OS X 10.5 Leopard or Higher Run ‘Setting System Environment’ . Select ‘Printer and Fax’ .
  • Page 113 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Click on ‘+’ button on the lower left corner. On the pop-up screen, i. Click on Windows on the top.
  • Page 114 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) ii. When you see ‘Workgroup’ , select Workgroup -> Name of the host of NAS in use -> The printer you wish to use. iii. Select ‘Choose the driver to use’ on ‘Printer to use’ at the bottom.
  • Page 115 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) v. Click on ‘Add’ . vi. The printer will appear on the list of printers. Now it is ready to be used.

  • Page 116: Itunes

    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) iTunes Using the iTunes services and recreating music files stored to the LG Network Storage through PC/Mac iTunes programs is possible. Music does not affect the PC/Mac storage space as transfer is done through streaming.

  • Page 117: Time Machine

    The Time Machine service is the automatic back-up function built in Mac OS X and allows the Mac data copies to be stored in LG Network Storage in their latest version. * This service is available in only Mac OS X version 10.5 Leopard or later versions.

  • Page 118: [Mac Os]

    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) [Mac OS] Click “Set system environment” > “Time Machine”. Click “Change the disc…” and select a folder preset on the web. Then click “Use as backup”.
  • Page 119 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) When you see a login screen, enter your ID and password and click “Connect:”. Time machine will be automatically turned on and start backup now. * Click the “Option” button to set folders which are unnecessary for backup.

  • Page 120: Iscsi

    Network Storage administrators) iSCSI This allows for the user to use the LG Network Storage Blue-ray/DVD drive as a CD drive. The LG Network Storage iSCSI service allows multiple users’ log-in and usage. * iSCSI of LG Network Storage can be used to read Blu-ray Drive and play videos, but cannot be used to burn.

  • Page 121: [Web Set-Up]

    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) C. Initiator Installation on a Mac Install the globalsan iSCSI initiator. This can be downloaded from the “studio network solutions” homepage. B Website http://www.studionetworksolutions.com [Web Set-up] On the webpage, click “Enable” and then click “Apply”. Once the iSCSI is activated, certain functions such as web burning will be limited.
  • Page 122 Click on the Discover tap on the top of the iSCSI Initiator program. Then click the “Add” button on the bottom. Then a new window to Add Target Portal (picture below) should appear. Enter the target (LG Network Storage) IP address. If a mandatory certification (CHAP) procedure has been set up in the web setting, enter the required information by pressing the Advanced button in the above window.
  • Page 123 Initiator will find and list the information for the target (LG Netsork Storage). Select the relevant target name and press the “Log On . . . ” and click “OK” from the pop-up window.
  • Page 124 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Log out when done. Go to the Targets tab on the top of the iSCSI Initiator program. Then click on the Details button on the bottom. Select the relevant Target Name and click “Log Off. . . “...
  • Page 125 B. Connection on a Linux PC Activate the iSCSI initiator. $ /etc/init.d/open-iscsi start Find the iSCSI target. If the LG Network Storage (target)’s IP address is 192.168.10.2, the target is: $ iscsiadm -m discovery -t sendtargets -p 192.168.10.2 Once target is found, execute the above command, which will display the target name.
  • Page 126 [Connection for CHAP certification] Open the open-iscsi set-up file “/etc/iscsi/iscsid.conf”and set up the CHAP certification. Follow the below instructions. (The CHAP certificate password must match the password set up for the iSCSI service on the LG Network Storage webpage.) discovery.sendtargets.auth.authmethod = CHAP discovery.sendtargets.auth.
  • Page 127 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) C. Connection on a Mac Activate iSCSI initiator. Go to System Preferences -> globalSAN iSCSI Find the iSCSI target. If the IP address is 192.168.10.2, see below. Go to globalSAN iSCSI -> Portals and press “+” and enter 192.168.10.2 and press “OK”.
  • Page 128 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Log in. Go to globalSAN iSCSI -> Targets, select the relevant target name and click “Log On..” and then “Connect” on the pop-up window.
  • Page 129 “open tray”. In addition, if data writing/reading on the LG Network Storage is in progress through the network drive connection, there may be substantial data transfers within the network and cause difficulty in data transfers through the iSCSI, resulting in slower and limited writing/reading speed per disk.

  • Page 130: Torrent

    Or enter the path to the .torrent file in “or enter a URL”. Once completely downloaded, the file can be found in the network folder [Refer to How to Use the LG Network Storage Network Folder] under \service\Torrent. [Use] Open: Register the file to download (.torrent).

  • Page 131: [Set-Up]

    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Filter: Hides or unhides the filter item. Inspector: Hides or unhides the information for the selected file. [Set-up] Click on the set-up icon. Select Preferences and set up the port to be used, transfer speed limit, etc.

  • Page 132: Rsync (Remote Data Backup Service)

    Network Storage administrators) RSYNC (Remote Data Backup Service) Data can be backed up using another LG NETWORK STORAGE within the same network to safely store precious user data saved on the LG NETWORK STORAGE through Rsync. Loss of important data due to the fault of the user, or damaged data due to errors, can be reloaded using restoration from backed up data.

  • Page 133: Rsync-Client Configuration

    Caution: Deletion of a configured Rsync server task will not affect user information or data already backed up RSYNC-client Configuration Users can configure functions for data backup to another LG NETWORK STORAGE within the same network. Select ‘Create’ . Task Name Enter the same task name as configured for the Rsync-server.

  • Page 134: Alteration Of Configuration For Remote Data Backup

    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Password i. Enter the same password as configured for the Rsync-server. Click on the ‘Choose Directory’ button to choose the directory containing the data to be backed up. (Choose one of the directories in Rsync-client.) Configure data backup frequency.

  • Page 135: Restore Data Using Rsync

    The LG NETWORK STORAGE Network File System function supports only the NFS server function and allows for multiple client computers to share the NFS directory’s data (read/write or read) set up in LG NETWORK STORAGE through the network.
  • Page 136 Do you wish to use the default NFS directory?” [User Defined NFS Directory Setting] The LG NETWORK STORAGE Network File System function allows the administrator to have folders created through the shared/folder menu or new folders set up as NFS directories.

  • Page 137: Usb Sync

    Connect a USB or memory device to the LG NETWORK STORAGE. * On the back panel of the LG NETWORK STORAGE there are 2 USB ports, on the front panel of the LG NETWORK STORAGE there is 1 USB port and 1 memory slot.
  • Page 138 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Select the device for backup and click on the ‘Create’ button. Specific options for Backup are listed. The task name is saved. The task information description is specified.
  • Page 139 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) - File date folder: Executes incremental back up from original file creation/ modification date. A backup folder is created with name in the form “yyyymmddhhmmss” according to the folder’s original creation date.
  • Page 140 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) - Copy: The original data can be synchronized. The backup target basic folder name is created from the “Device ID”. The backup is saved in the original file folder - One: The basic function is commensurate to the ‘Copy’...
  • Page 141 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) USB Sync Setting The current task list is indicated and tasks may be created, edited, deleted or synched. • Clicking on the ‘Create’ button allows for a new task to be created.

  • Page 142: E-Sata

    This function enables data transfer between external e-SATA devices and the LG NETWORK STORAGE. The LG NETWORK STORAGE folders are displayed on the left window and folder structure of e-SATA devices on the right. <Button Functions> :Moves to upper folder.

  • Page 143: Usb / Memory Card

    :Moves to upper folder. : Refreshes the current folder : Deletes selected files or folders. : Copies selected LG NETWORK STORAGE folders/files to USB device / memory card folder : Copies selected USB device / memory card folders/files to LG NETWORK...

  • Page 144: Information

    Status Status of the LG Network Storage Network, Volume and external devices can be viewed. For more specific details or to make changes, clicking on the icons on the bottom will direct the users to the relevant webpage.
  • Page 145 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) All hard disk information connected to the LG Network Storage can be viewed by Bay position. The information pertaining to the Blu-ray drive connected to the LG Network Storage can be viewed.

  • Page 146: Log

    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) The LG Network Storage service history can be displayed/saved. The system use history can be viewed. The Samba use history can be viewed. The FTP use history can be viewed.
  • Page 147 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) Shows the history of Blu-ray/DVD. The diagnosis is und and the result can be viewed - The service code for proper functions is displayed as [SVC_ CODE: 00_00].

  • Page 148: Top Menu

    File viewer File Viewer is an interface for web file management, which allows the user to upload, download, copy, move, delete and rename the file or directory in the shared folder in LG NETWORK STORAGE server, using a web browser.
  • Page 149 4. LG Network Storage Web Menu Use (for LG Network Storage administrators) - To Move a File or a Folder Select the file and click on ‘Move’ . Select the directory. Moving the file or the folder will be automatically cancelled if there is a file or a folder with the same name.
  • Page 150 Copy the link created and uses it. *Note: The address for a shared link is set to be the IP address of LG NETWORK STORAGE. The shared link can be connected from outside only when LG NETWORK STORAGE can be connected from outside as well.

  • Page 151: My Information

    4. LG Network Storage Web Menu Use (for LG Network Storage administrators) -Zipped File Select a zip file on the screen in the left to browse the file list in the zip file. You can unzip the portion of the zip file you select.

  • Page 152: Lg Network Storage Web Menu Usage (Regular Users)

    5. LG Network Storage web menu usage (Regular users) Blu-ray / DVD The built-in Blu-ray/DVD drive allows direct copy of data from discs to LG Network Storage. Furthermore, secondary backup of data using the Blu-ray drive makes data management safer and more efficient.

  • Page 153: Disc Data Copy

    Disc Data Copy Storage of disc data using the LG NETWORK STORAGE is a data disc copy function. Insert the data disc in to the Blu-ray / DVD Drive and press the ‘Next’ button. If the disc is completely recognized, it will appear as ‘Data Disc’ on the ‘Media Type’ cell.

  • Page 154: Disc Image Backup

    Disc Image Backup The disc information from the Blu-ray / DVD Drive is stored on the LG NETWORK STORAGE as an image file (*.iso, *.cue, *.bin). For Data Discs, files with extension iso are created, and for Audio and Video CDs, files with extensions cue and bin respectively are created. For copy-protected discs, image saving is not possible.

  • Page 155: Burning

    5. LG Network Storage web menu usage (Regular users) Burning Burning the LG Network Storage data to disc is possible using the Blu-ray/DVD drive.

  • Page 156: Burn Disc

    5. LG Network Storage web menu usage (Regular users) Burn Disc Burning LG NETWORK STORAGE files to disc is possible. [Button functions] : Moves to upper folder. : Refreshes the current folder. : Files or folders selected on the left window are sent to the right window to organize a list for recording.
  • Page 157 5. LG Network Storage web menu usage (Regular users) Move the intended folder or file to the destined location. Selecting a folder or file to record and move to the right side produces a configuration data list...
  • Page 158 5. LG Network Storage web menu usage (Regular users) Specify disc name in the ‘‘Disc Name’ window Click on the ‘Refresh’ button and confirm that disc writing is possible as indicated in the disc status box. Put a check in ‘Verify after completing burning’ if you wish to run a test on the written file after writing in a disc.

  • Page 159: Burn Image

    5. LG Network Storage web menu usage (Regular users) Burn Image The image file of the disc used to save LG NETWORK STORAGE data can be burnt to disc. Go to the folder where the intended is located Selecting an image file to record Click on the ‘Refresh’...

  • Page 160: Usb Sync

    Connect a USB or memory device to the LG NETWORK STORAGE. * On the back panel of the LG NETWORK STORAGE there are 2 USB ports, on the front panel of the LG NETWORK STORAGE there is 1 USB port and 1 memory slot.
  • Page 161 5. LG Network Storage web menu usage (Regular users) Select the device for backup and click on the ‘Create’ button. Specific options for Backup are listed. The task name is saved. The task information description is specified. The selected device’s unique ID is displayed. ID specific to the manufacturer information, product information, etc, are displayed.
  • Page 162 5. LG Network Storage web menu usage (Regular users) - File date folder: Executes incremental back up from original file creation/ modification date. A backup folder is created with name in the form “yyyymmddhhmmss” according to the folder’s original creation date.
  • Page 163 5. LG Network Storage web menu usage (Regular users) - Copy: The original data can be synchronized. The backup target basic folder name is created from the “Device ID”. The backup is saved in the original file folder - One: The basic function is commensurate to the ‘Copy’ option. Information deleted from the original is also deleted from the back up differently from the previous version.
  • Page 164 5. LG Network Storage web menu usage (Regular users) USB Sync Setting The current task list is indicated and tasks may be created, edited, deleted or synched. • Clicking on the ‘Create’ button allows for a new task to be created.

  • Page 165: E-Sata

    This function enables data transfer between external e-SATA devices and the LG NETWORK STORAGE. The LG NETWORK STORAGE folders are displayed on the left window and folder structure of e-SATA devices on the right. <Button Functions> :Moves to upper folder.

  • Page 166: Usb / Memory Card

    :Moves to upper folder. : Refreshes the current folder : Deletes selected files or folders. : Copies selected LG NETWORK STORAGE folders/files to USB device / memory card folder : Copies selected USB device / memory card folders/files to LG NETWORK...

  • Page 167: Top Menu

    File viewer File Viewer is an interface for web file management, which allows the user to upload, download, copy, move, delete and rename the file or directory in the shared folder in LG NETWORK STORAGE server, using a web browser.
  • Page 168 5. LG Network Storage web menu usage (Regular users) - To Move a File or a Folder Select the file and click on ‘Move’ . Select the directory. Moving the file or the folder will be automatically cancelled if there is a file or a folder with the same name.
  • Page 169 Copy the link created and uses it. *Note: The address for a shared link is set to be the IP address of LG NETWORK STORAGE. The shared link can be connected from outside only when LG NETWORK STORAGE can be connected from outside as well.

  • Page 170: My Information

    5. LG Network Storage web menu usage (Regular users) -Zipped File Select a zip file on the screen in the left to browse the file list in the zip file. You can unzip the portion of the zip file you select.

  • Page 171: Lg Network Storage Via Network Drive

    For Windows users, observe the following procedure to access the LG Network Storage. PC Application Program Usage After setting up the ‘LG Network Storage PC Software Installer’ disc NAS Detector program and desktop icon use, execute and clicking on the “Open Network Folder” button will allow access to LG Network Storage’s sharing folder.
  • Page 172 Windows OS “Execute” function use Clicking on “Execute” in the Windows OS can start a new menu with inputting the \\IP Address to the LG Network Storage can be accessed. If IP address is unknown, refer to <Use Application Program>...
  • Page 173 6. LG Network Storage via network drive Tip) Post server connection, network drive set-up If there is a connection to the LG Network Storage, all sharing folders are registered. If settings involve the network drive using the “Tools > Map Network Drive…”, future...
  • Page 174 6. LG Network Storage via network drive * Multiple folders can be set up in different network drives in the same way.

  • Page 175: Mac Os Connection

    MAC users can connect to the LG Network Storage by methods such as explained below. [“Server connect” function use] The LG Network Storage sharing folder can be added to the Mac server list on the desk top. The connection order is as follows.
  • Page 176 6. LG Network Storage via network drive Input the log in ID and password and click on the ‘OK’ button. The initial settings are as follows: ID: admin, password: admin. For future security, it is recommended that password is changed after logging on to the web administrator page.
  • Page 177 6. LG Network Storage via network drive Select the volume to be used (e.g. cdrom/service/volume1_public) in the LG Network Storage folder list and click “OK”. The relevant shared folder will open and the contents displayed.

  • Page 178: Linux Os Access

    6. LG Network Storage via network drive Linux OS access LG Network Storage supports Windows, MAC, and Linux OS, through the NFS service. The Linux system connection is as follows. Ubuntu will be used as a reference. Click on the menu bar and then select ‘network’ .
  • Page 179 Selecting LG Network Storage will display the folder list of LG Network Storage. Select the volume to be used (e.g. cdrom/service/volume1_public). If the ID and passwords are inputted then connection to the LG Network Storage is allowed. Initial default information is ID: admin, password: admin. For future security, it is recommended that password is changed after logging on to the web administrator page.
  • Page 180 6. LG Network Storage via network drive After logging in, the LG Network Storage share folder appears.

  • Page 181: Lg Network Storage Maintenance

    LG Network Storage shut down/restart The following steps pertain to server shut down/restart. Inform all connected users to save files in operation and stop use of the LG Network Storage. Open the administrator web page, and go to the ‘System > Power > Shutdown’ tab.

  • Page 182: Administrator Password And Network Set Up Initialization

    3. Network setup/Ethernet Frame Size : Jumbo frame inactivity 4. System device/IP filter: All connections are allowed 5. RAID components 6. Service set-up value 7. User/folder/group list • Log in to the LG Network Storage using the default user name and password: ID: admin, password: admin...

  • Page 183: System Information Checking And Saving

    “Self-diagnosis” tab to immediately execute the LG Network Storage self-diagnosis. Even in the middle of usage, the administrator can open up the administrator web menu and select the ‘Self-diagnosis’ tab in the ‘Information > Log’ menu, so the LG Network Storage immediately runs self-diagnosis.

  • Page 184: System Failure Or Malfunction

    CODE:xx_yy] and make a record on tasks done before the accident and messages you witnessed. For error messages mentioned in 1, you can get help from LG electronics Service Site if such errors were caused by negligence. http://www.lge.com. When no solution exists, do not disassemble and call the service center for remote technical support.

  • Page 185: Raid Configuration Error Checkup

    The LG Network Storage RAID configuration is abnormal when error messages appear, hence resort to another solution: Note: To avoid data obstacles, first perform a back-up of all important data from the LG Network Storage. Confirm whether there is an error on the RAID configuration: On the Status Information/Volume page, the volume configuration state will show as ”degraded/destroyed”.
  • Page 186 1. In the LG Network Storage, one HDD can be connected or disconnected at a time. 2. 10 seconds will lapse before 2 tones are heard when the LG Network Storage is connected to or disconnected from a new hard drive.

  • Page 187: Appendix A Volume Construction & Raid Configuration

    Appendix A Volume Construction & RAID Configuration This section describes volume configuration and supported RAID level. When configuring volume using RAID, the use of Disks of the same manufacturer and capacity is recommended to maximize stability and efficiency of configuration. In the case that the Disks differ in capacity and trademark, data may be lost due to low system stability and efficiency.
  • Page 188 Appendix A Volume Construction & RAID Configuration • RAID1 mirroring volumes Data can be exactly replicated to the Disk through this technique. If one Disk becomes damaged in the volume, data can be efficiently transferred, saved and backed up to another configured Disk.
  • Page 189 Appendix A Volume Construction & RAID Configuration • RAID0 striping volume The Disks are configured in parallel so that they are all being used at once to store data, as if they were one Disk in summation. Because the data is saved to each Disk in parallel, many files of low capacity are read simultaneously but with superior efficiency.
  • Page 190 Appendix A Volume Construction & RAID Configuration • JBOD Linear volume The Disks are configured in series so that they are all being used at once to store data, as if they were one Disk in summation. The volume’s storage capacity can be maximized, as the data is stored to the Disks in sequence.
  • Page 191 Appendix A Volume Construction & RAID Configuration • RAID5 Parity volume The Disks are configured in parallel so as to all be used at once to store data; parity (P) suggests that when the Disk is damaged the system will not be affected, which is the system that the volume uses.
  • Page 192 2 at a time by RAID1, followed by the configured set being associated by RAID0 and hence the volume as a whole is configured. With more than 4 Disks present, configuration occurs in pairs. 4 Disks are used to configure the LG Network Storage.
  • Page 193 Appendix A Volume Construction & RAID Configuration LG Network Storage provides dedicated online support and customer service via instant messenger. You can contact us by the following means: -. Online Support : http://www.lgservice.com LG Electronics U.S.A. Inc, 1000 Sylvan Ave.

  • Page 194: Appendix B Open Source Software Notice

    Appendix B Open source software notice The following GPL executables and LGPL libraries used in this product are subject to the GPL/LGPL License Agreements: GPLv2.0 : • apcupsd • apt • ascii-3.8 • base-files • base-passwd • bash • bash-2.05b •...
  • Page 195 Appendix B Open source software notice • ifplugd • ifupdown • inadyn • inotify-tools • jQuery • krb5 • libcap • libgdbm • libid3tag • Linux kernel 2.6 • lockfile-progs • logrotate • lprng • lsb • lzo • mdadm •...
  • Page 196 Appendix B Open source software notice • shadow • smart • smbwebclient • ssmtp • sysklogd • time • transmission • u-boot • udev • util-linux • xfs GPLv3.0 • binutils • gnupg • parted • rsync • samba • wget LGPLv2.1 •...
  • Page 197 • packer • ufo LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics at: opensource@lge.com...
  • Page 198 Appendix B Open source software notice This product includes • Berkeley DB under Berkeley DB license (http://www.oracle.com/technology/software/ products/berkeley-db/htdocs/oslicense. html ) Copyright © 1990-2008 Oracle Corporation. Copyright © 1990, 1993, 1994, 1995 The Regents of the University of California Copyright © 1995, 1996 The President and Fellows of Harvard University. openLDAP under openLDAP Public License (http://www.OpenLDAP.org/license.html.) Copyright ©...
  • Page 199 Appendix B Open source software notice This product includes other open source software. • bind9 : Copyright© 2004-2008 Internet Systems Consortium, Inc. (“ISC”) Copyright © 1996-2003 Internet Software Consortium. Copyright © 1996-2001 Nominum, Inc. cyrus-sasl2: Copyright © 1998-2003 Carnegie Mellon University debconf: Copyright ©...
  • Page 200 Appendix B Open source software notice • pcre: Copyright © 1997-2007 University of Cambridge Copyright © 2007, Google Inc. PHP5 software, freely available from http://www.php.net/software/. Copyright © 1999 - 2009 The PHP Group. popt: Copyright © 1998 Red Hat Software •...
  • Page 201 Appendix B Open source software notice All rights reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR...

  • Page 202: Appendix C Compatible/Recommended Device List

    For the latest compatible/recommended device list, please visit http://www.lge.com. Recommendation hard disk list The following is a list of hard disks possibly compatible with the LG Network Storage. The following hard disks are recommended. In the case of using hard disks not recommended by LG Electronics, malfunctions in the LG Network Storage can occur.

This manual is also suitable for:

N4b2nd4N4b2N4r2

Table of Contents