Connecting your Mirra to a Power Source
To connect your Mirra to a power source,
Step 1:
Step 2:
Step 3:
Mirra Manual for Macintosh
Plug the appropriate end of the provided power cable into the power slot on
the rear of your Personal Server. Make sure it's firmly and completely
seated.
Figure 2~3 Mirra Power Plug Outlet
Connect the other end of the power cable to an AC power source.
On the front of the Mirra, press and release the power button:
Figure 2~4 Mirra Power Button
•
The green light to the right of the power button shines steadily.
•
The amber light to the left of the power button starts blinking after a few
seconds.
Release 2.2
6