Deleting A Backup - LaCie 301160U - 1TB Ethernet Disk RAID Network Attached Storage User Manual

LaCie Ethernet Disk RAID
User Manual

5.6.3. Deleting a Backup

■
You can delete all backups of a given disk, but you
cannot delete just an individual backup from a specific
date and time.
To delete all backups of a disk:
1. In the navigation bar, click Backups.
2. Select the radio button adjacent to the disk whose
backups you want to delete (in the second
column).
3. Click Delete Backup.
4. When prompted to confirm the deletion, click OK.
The disk no longer appears on the
and all backup versions are deleted.
If only one disk was protected, the computer name
disappears from the page as well.
of all disks for a particular computer, that comput-
er no longer appears on the Backups page. How-
ever, that computer name remains in the Ethernet
Disk RAID and counts toward the total number
of computers that are allowed to back up to the
Ethernet Disk RAID. If you want to delete all
backups of all disks and the computer name, refer
Select
to section
TeChNICAl NOTe:
and the user did not previously remove protection
for that disk, when the user subsequently accesses
Backups page,
Client Backup and Recovery, the Status page will
indicate that the backup of the protected disk is
offline. To back up the disk once again, the user
must remove protection and then protect the disk
again. For more information, refer to section
Removing Protection
Your
Managing Your Ethernet Disk RAID
ImpOrTANT INfO: If you delete all backups
5.6.4. Deleting a Client.
If you delete a backup
and section
Disks.
page 
7.9.5.
7.2. Protecting