Replacing Or Adding A New Hard Drive - D-Link DNS-343 - NAS Server - Serial ATA-150 Product Manual

Section 3 - Configuration

Replacing or Adding a New Hard Drive

It is recommended that you backup your important files before replacing or adding a new hard drive to the DNS-343.
Replacing a Hard Drive:
Please make sure the power is off before replacing a hard drive. After you install the new drive, turn on the DNS-343
and then connect to the Web UI. The DNS-343 will prompt you to format the new drive. Refer to page 15.
Adding a New Hard Drive:
The DNS-343 is able to work with one single hard drive, two, three, and four hard drives. Please make sure the power
is off before installing a new hard drive.
After you install the new drive(s), turn on the DNS-343 and then connect to the Web UI. The DNS-343 will prompt you
to format the new drive(s). Refer to page 15.
Note: Formatting a hard drive will erase the data stored on the hard drive. Please backup important data before
formatting a hard drive.
D-Link DNS-343 User Manual