Output Specifications; Table 8-16 Constant Voltage (Cv) Output Specifications; Table 8-17 Constant Current (Cc) Output Specifications; Constant Voltage And Constant Current Outputs - Agilent Technologies U1401B User's Manual And Service Manual

Output Specifications

Constant voltage and constant current outputs

Table 8-16 Constant voltage (CV) output specifications

Function
Constant
[1]
voltage (CV)
[1]
The maximum input voltage protection is 30 VDC.
[2]
Loading coefficient: 0.012 mV/mA for 1.5 V output.

Table 8-17 Constant current (CC) output specifications

Function
Constant
[1]
current (CC)
[1]
The maximum input voltage protection is 30 VDC.
[2] Loading coefficient: 1 μA/ V, the minimum output voltage is based on 20 mA into a 600 Ω load.
[3] If the current loop has a 24 V power, a minimum output voltage of 24 V is achievable with a 20 mA current in a 1200 Ω load.
This is only applicable for the simulation mode for mA output, refer to
information.
U1401B User's and Service Guide
Accuracy is given as ± (% of output + counts of least
significant digit) at 23 °C ± 5 °C, with relative humidity less
than 80% R.H., and warmed up for at least five minutes.
Range Resolution
± 1.500 V
± 15.000 V
Range Resolution
± 25.000 mA
Accuracy
0.1 mV 0.03% + 3
1 mV
Accuracy
1 μA
0.03% + 5
"Simulation Mode for mA Output"
Specifications 8
Maximum output
[2]
current
25 mA or below
Maximum output
[2]
voltage
[3]
12 V or below
on page 88 for more
155