Satellite A660/A660D, Satellite A665/A665D
2. Be sure to place the battery with correct polarities. Press the battery
down to the stopper then push it forward to fit into the battery case.
3. Close the battery cover. Close the cover securely until it clicks.
Replacing the battery
1. Open the battery cover on the back side of the remote controller.
2. Hold down the stopper and slide the battery out of battery case.
3. Insert the battery in place. Be sure to place the batteries with correct
polarities. Press the battery down to the stopper then push it forward to
fit into the battery case.
4. Close the battery cover. Close the cover securely until it clicks.
2-26
1
Figure 2-18 Inserting the battery
Figure 2-19 Closing the battery cover
Figure 2-20 Removing the batteries
2
1. Stopper
2. Battery
User's Manual