2.3.10
Rear panel connection
Rear panel connectors
1. USB 2.0 ports 3, 4, 5 and 6
2. USB 2.0 ports 1 and 2
3. Bluetooth module*
4. Optical S/PDIF Out port
5. VGA port
6. Intel LAN (RJ-45) port 1**
*, ** and ***: Refer to the tables on the next page for bluetooth module LED, LAN port LED, and
audio port definitions.
•
•
•
•
•
2-42
DO NOT insert a different connector to the external SATA port.
Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under
Windows® OS environment and after the USB 3.0 driver installation.
USB 3.0 devices can only be used as data storage only.
We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance for your USB 3.0 devices.
If you want to use the hot-plug function of the external SATA ports, you have to set the
JMB Storage Controller item in the BIOS setting to [Enabled] and install the JMicron
JMB36X Controller Driver from the motherboard support DVD. Refer to section 3.5.6
Onboard Devices Configuration for details.
7. External SATA port
8. HDMI port
9. DVI port
10. USB 3.0 ports 1 and 2
11. Audio I/O ports***
Chapter 2: Hardware information