Air King 4CH70B/9701B Operating Instructions & Parts Manual

MODELO 4CH70B/9701B
ASSEMBLY A (21-3/8"/54.3 cm width)
ENSAMBLE A (21-3/8"/54.3 cm anchura)
ASSEMBLAGE A - 54,3 cm de largeur
ASSEMBLY B (20-1/2"/52.1 cm width)
ENSAMBLE B (20-1/2"/52.1 cm anchura)
geur
ASSEMBLAGE B - 52,1 cm de lar
Assembly B
Ensamble B
Assemblage B
PART
KEY NO. DESCRIPTION
1 Front & Back legs (Holes at top & bottom) 4
5062034SG
2 5062032SG Cross Brace
3 *** 1-3/4" Bolts
4 *** 2-1/4" Axle Bolts
5 *** Rubber Washers
6 *** Nut 1/4" 20
7 2091161 Plastic Nuts
8 *** Fan Support Knobs
9 *** Metal Wheel Spacers
10 *** Plastic Spacers
11 2011902 Wheels
12 2090572 Plastic Caps
13 5062031SG Handles
*** Contained in Parts Bag (Part Number: 2098163)
NUMERO
REF. DE PIEZA DESCRIPCIÓN
1 5062034SG Patas Delanteras e Traseras
(Agujeros Superiores e Inferiores)
2 5062032SG Barra Transversal
3 *** Pernos de 1-3/4"
4 *** Pernos Eje de 2-1/4"
5 *** Arandelas de Goma
6 *** Tuerca con Rosca 1/4" 20
7 2091161 Tuercas Plásticas
8 *** Perillas de Soporte del Ventilador
9 *** Espaciadores Metálicos Para las Ruedas
10 *** Espaciadores Plásticos
11 2011902 Ruedas
12 2090572 Tapas Plásticas
13 5062031SG Asas
*** Contenidas en la Bolsa de Piezas (Numero de Pieza: 2098163)
Rev. G 12/07
12
7
7
13
8
5
10
5
6
3
1
3
11
2
6 6
6
3
1 Assembly A
9
4
Ensamble A
Assemblage A
11
NO DE
QTY.
CLÉ PIÈCE DESCRIPTION
1 5062034SG Pattes avant et arrière
(trous en haut et au bas)
2
2 5062032SG Entretoise
6
3 *** Boulons de 4,45 cm
2
4 *** Boulons d'essieu de 5,7 cm
2
5 *** Rondelles de caoutchouc
8
6 *** Écrou de 0,64 cm 20
2
7 2091161 Écrous de plastique
2
8 *** Boutons de support du ventilateur
2
9 *** Espaceurs en métal pour roulette
2
10 *** Espaceurs en plastique
2
11 2011902 Roulettes
4
12 2090572 Couvercles de plastique
2
13 5062031SG Poignées
***Contenus dans le sachet de pièces (numéro de pièce :
2098163)
CANT.
4
2
6
2
2
8
2
2
2
2
2
4
2
4
OPERATING INSTRUCTIONS & PARTS MANUAL
12
13
8
10
2
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH
3
4
9
DESCRIPTION
®
The Air King Roll-About Stand can accommodate 20" (50.8 cm)
Box Fans. Sturdy powder coated steel construction, including
rear wheels for easy mobility, raises fan 25" (63.5 cm) or 27"
(68.6 cm) above the floor.
ASSEMBLY
( S e e p a g e 4 f o r A s s e m b l y D i a g r a m
a n d r e p l a c e ment parts)
QTÉ
1. Fasten one Front Leg (1) and one Back Leg (1) to each
4
Handle (13) using a Bolt (3) and Nut (6) into lower of two
Holes in each Handle.
2
2. Connect the two Leg and Handle Assemblies, with a Cross
6
Brace (2) using Bolt (3) and Nut (6) through the upper Hole
2
in each Handle.
2
3. Bolt the second Cross Brace (2) in position near the bottom
8
of the Back Legs.
2
4. To attach Wheels, insert a 2-1/4" Axle Bolt (4) and Metal
2
Spacer (9), through Wheel (11), and into the bottom Hole
2
on each Back Leg. Secure with 1/4" -20 Nuts (6).
2
Note: Lengthened Wheel Hub side goes towards Leg, spac-
2 ing Wheel away from Tube when assembled.
4
5. Slip Plastic Caps (12) over Tubing ends at the top of the
2
Handles and at the bottom of the Front Legs.
6. Push Plastic Nut (7) in the square Hole on each side of the
Fan.
WHAT THIS WARRANTY COVERS: This product is warranted against defects in workmanship and/or materials.
HOW LONG THIS WARRANTY LASTS: This warranty extends only to the original purchaser of the product and lasts for one (1) year from the date
of original purchase or until the original purchaser of the product sells or transfers the product, whichever first occurs.
WHAT AIR KING WILL DO: During the warranty period, Air King will, at its sole option, repair or replace any part or parts that prove to be defective
or replace the whole product with the same or comparable model.
WHAT THIS WARRANTY DOES NOT COVER: This warranty does not apply if the product was damaged or failed because of accident, improper
handling or operation, shipping damage, abuse, misuse, unauthorized repairs made or attempted. This warranty does not cover shipping costs
for the return of products to Air King for repair or replacement. Air King will pay return shipping charges from Air King following warranty repairs
or replacement
ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY),
LAST ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE OR UNTIL THE ORIGINAL PURCHASER OF THE PRODUCT SELLS OR TRANSFERS
THE PRODUCT, WHICHEVER FIRST OCCURS AND IN NO EVENT SHALL AIR KING'S LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY
INCLUDE (I) INCIDENTAL OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER, OR (II) REPLACMENT OR REPAIR OF ANY HOUSE
FUSES, CIRCUIT BREAKERS OR RECEPTACLES. NOTWITHSTANDING ANYTHING TO THE CONTRARY, IN NO EVENT SHALL AIR KING'S
LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT AND ANY SUCH LIABILITY
SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD.
Some states and provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential
damages, so these exclusions or limitations may not apply to you. This warranty gives you specific legal rights. You may also have other rights
which vary from state to state and province to province.
Proof of purchase is required before a warranty claim will be accepted.
Rev. G 12/07
2084013
ROLL-ABOUT STAND
MODEL 4CH70B/9701B
To be used on Type 1 Box Fans only
READ AND SAVE THESE INSTRUCTIONS
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
7. Lay Fan on the floor, front side up. Using a yard stick or
tape measure, measure the Fan body width. If Fan width
is 21-3/8" (54.3 cm) continue using Assembly Detail A. If
Fan width is 20-1/2"(52.1 cm), continue using Assembly
Detail B.
8. Place Fan Stand on floor, Wheels down, with Handles on
each side of Fan. Align Handle Holes with the Plastic Nuts
on Fan. Now assemble the Fan to the Roll-About Stand
using Assembly A or B determined in Step 7.
Place Rubber Washers (5) between the Stand Handles and
sides of the Fan. Insert Fan Support Knobs into Plastic Spacers
(10). Then thread Fan Support Knobs through the Handles and
Rubber Washers into the Plastic Nuts. Skip to Step 10.
Place Rubber Washers (5) between the Stand Handles and sides
of the Fan. Find Plastic Spacers (10). Thread Fan Support Knobs
through the Handles, Plastic Spacers, Metal Washers, Rubber
Washers and into the Plastic Nuts. Continue to Step 10.
9. Check all Bolts for tightness.
10. Lift the stand to its upright position.
LIMITED WARRANTY
1
ASSEMBLY A - (21-3/8"/54.3 cm width)
ASSEMBLY B - (20-1/2"/52.1 cm width)
2084013