Table of Contents
Advertisement
5-2. Adjusting the Viewing Angle
2Tilt Lock
1Pan Lock
(1) To check the video image on the monitor, connect the "Monitor Out Harness Wire" to the
connector "MON".
(2) The lens pan direction can be adjusted by turning pan lock 1 counter clockwise to loosen it
without moving the lens. Retighten after adjusting.
Note:
• Do not turn the lens over 360 , otherwise the inner connector may break and the camera
will be damaged.
(3) Tilt angle of the lens can be adjusted within the limit of -73 to +73 by loosening the tilt lock 2.
After adjusting, tighten the tilt lock 2.
(4) Adjust the zoom position by loosening the zoom lock lever 3. After adjusting, tighten the zoom
lock lever 3.
(5) When installing the camera on a wall, manipulate the horizontal ADJ ring 4 to adjust the
inclination of the image.
(6) Adjust the focus by loosening the focus lock lever 5. After adjusting, tighten the focus lock
lever 5.
(7) Repeat the adjustments from step (1) to step (5) till the optimum image appears.
Downloaded from
www.Manualslib.com
Tilt rotation
Horizontal
rotation
2Tilt Lock
Pan
manuals search engine
5Focus Lock Lever
4 Horizontal
ADJ Ring
- 15 -
Far ( )
Tele
Near
Wide
3 Zoom Lock
Lever
Top mark
To Monitor
Advertisement
Table of Contents
