HP rp4410 Installation Manual page 53

Table 1-9 DIMM Filler Requirements for 32-DIMM Memory Extender Board
4 DIMMs in quad 0
8 DIMMs in quads 0 and 1
12 DIMMs in quads 0, 1, and 2
16 DIMMs in quads 0, 1, 2, and 3
20 DIMMs in quads 0, 1, 2, 3, and 4
24 DIMMs in quads 0, 1, 2, 3, 4, and 5
28 DIMMs in quads 0, 1, 2, 3, 4, 5, and 6
32 DIMMs in quads 0, 1, 2, 3, 4, 5, 6, and 7
a. One DIMM filler board covers two adjacent DIMM connectors.
Chapter 1
12 fillers total:
Two fillers in quads 1, 3, 4, 5, 6, and 7
(quad 2 remains unfilled)
Eight fillers total:
Two fillers in quads 4, 5, 6, and7
(quads 2 and 3 remain unfilled)
Eight fillers total:
Two fillers in quads 4, 5, 6, and7
(quad 3 remains unfilled)
Eight fillers total:
Two fillers in quads 4, 5, 6, and7
(all quads filled)
Four fillers total:
Two fillers in quads 5 and 7
(quad 6 remains unfilled)
No fillers required
No fillers required
No fillers required
Installing the System
Installing Additional Components
53